On Wed, 2015-08-12 at 13:43 -0500, Andrew Ruder wrote: > Cc: Marek Vasut <[email protected]> > Cc: Heiko Schocher <[email protected]> > Signed-off-by: Andrew Ruder <[email protected]> > --- > > This driver was written before the driver model stuff was really > around (or at > least based on a U-Boot version that only had very preliminary > support) so > there might be some older conventions in use here. I have tested on > a PXA270 > board running upstream master with this driver, however - so to some > extent > this all still works fine. Let me know if things need to change to > be > accepted, and I'll try to find some time to update!
Apart from the missing commit message. Signed-off-by: Marcel Ziswiler <[email protected]> Tested-by: Marcel Ziswiler <[email protected]> Tested-on: Colibri PXA270 V1.2C, V1.2D, V2.2B, V2.4A on Colibri Evaluation Board V3.1A Note: While power I2C works on the older V1.2C version it does not seem to work on any of the newer ones but this might just be a pin muxing resp. missing pull up issue. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
