On Sun, 2015-08-16 at 02:57 +0200, Marek Vasut wrote: > > Apart from the missing commit message. > > > > Signed-off-by: Marcel Ziswiler <[email protected]> > > I think you're misunderstanding the meaning of a SoB line here, the > SoB > line is a certificate of origin. You didn't write the driver and/or > you > didn't make changes to it, so you don't place your certificate on it > :)
Yeah, it's kind of late. Should have been an Acked-by of course, sorry. > > Tested-by: Marcel Ziswiler <[email protected]> > > This one is of course good. > > > Tested-on: Colibri PXA270 V1.2C, V1.2D, V2.2B, V2.4A on Colibri > > Is this some kind of a newly invented tag ? :-) Well, others have been using that one on and off for a while. So at least I am not the inventor (;-p). > > Evaluation Board V3.1A > > Note: While power I2C works on the older V1.2C version it does not > seem > > to work on any of the newer ones but this might just be a pin > muxing > > resp. missing pull up issue. > > Very nice. Btw. how do you bootstrap those modules, do you use that > OpenPXA > OBM or OBM2 or something else entirely ? No, I never used any of that crap. Just purely U-Boot even on the PXA3xx but the PXA270 being just a regular NOR beast is really nothing special. Just using ye olde BDI2000 if things go awry. Unfortunately my PXA3xx U-Boot NAND SPL stuff never made it mainline and you since dropped PXA3xx support entirely. If I ever get some precious time I might actually re-add those again especially now with Marvell having committed to keep selling us PXA320 chips to 2020. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
