Commit 620776d "tftp: adjust settings to be suitable for 100Mbit ethernet"
causes the following error message when trying to load a file using 'tftp'
command via a tftp server.
TFTP error: 'Unsupported option(s) requested' (8)
This is due to with commit 620776d changes, the tftp option 'timeout'
value is now set to zero which is an invalid value as per RFC2349 [1].
Valid values range between "1" and "255" seconds, inclusive. With some
tftp servers that strictly implement the RFC requirement, it reports
such an error message.
Revert commit 620776d for RFC compliance.
[1] https://www.ietf.org/rfc/rfc2349.txt
Signed-off-by: Bin Meng <bmeng...@gmail.com>
Acked-by: Joe Hershberger <joe.hershber...@ni.com>
---
Changes in v3:
- Drop e1000 build warning patch which is already applied
Changes in v2:
- Rewrite the commit message to mention RFC2349
net/tftp.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/net/tftp.c b/net/tftp.c
index 18ce84c..89be32a 100644
--- a/net/tftp.c
+++ b/net/tftp.c
@@ -19,10 +19,10 @@
/* Well known TFTP port # */
#define WELL_KNOWN_PORT 69
/* Millisecs to timeout for lost pkt */
-#define TIMEOUT 100UL
+#define TIMEOUT 5000UL
#ifndef CONFIG_NET_RETRY_COUNT
/* # of timeouts before giving up */
-# define TIMEOUT_COUNT 1000
+# define TIMEOUT_COUNT 10
#else
# define TIMEOUT_COUNT (CONFIG_NET_RETRY_COUNT * 2)
#endif
@@ -711,10 +711,10 @@ void tftp_start(enum proto_t protocol)
if (ep != NULL)
timeout_ms = simple_strtol(ep, NULL, 10);
- if (timeout_ms < 10) {
- printf("TFTP timeout (%ld ms) too low, set min = 10 ms\n",
+ if (timeout_ms < 1000) {
+ printf("TFTP timeout (%ld ms) too low, set min = 1000 ms\n",
timeout_ms);
- timeout_ms = 10;
+ timeout_ms = 1000;
}
debug("TFTP blocksize = %i, timeout = %ld ms\n",
--
1.8.2.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
