On 3 September 2015 at 14:08, Siva Durga Prasad Paladugu <[email protected]> wrote: > Hi Jagan, > >> -----Original Message----- >> From: Jagan Teki [mailto:[email protected]] >> Sent: Thursday, September 03, 2015 1:38 PM >> To: Siva Durga Prasad Paladugu >> Cc: [email protected]; Michal Simek >> Subject: Re: [PATCH v4 01/16] spi: Add zynq qspi controller driver >> >> Hi Siva, >> >> On 3 September 2015 at 12:56, Siva Durga Prasad Paladugu >> <[email protected]> wrote: >> > Hi, >> > >> >> -----Original Message----- >> >> From: Jagan Teki [mailto:[email protected]] >> >> Sent: Tuesday, September 01, 2015 11:42 AM >> >> To: [email protected] >> >> Cc: Jagan Teki; Michal Simek; Siva Durga Prasad Paladugu >> >> Subject: [PATCH v4 01/16] spi: Add zynq qspi controller driver >> >> >> >> Added zynq qspi controller driver for Xilinx Zynq APSOC, this driver >> >> is driver- model driven with devicetree support. >> >> >> >> => sf probe >> >> SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64 >> >> KiB, total >> >> 16 MiB => mw.b 0x100 0xCC 0x1000000 => sf update 0x100 0x0 0x1000000 >> >> device 0 whole chip >> >> 16777216 bytes written, 0 bytes skipped in 59.842s, speed 289262 B/s >> >> => sf read 0x3000000 0x0 0x1000000 device 0 whole chip >> >> SF: 16777216 bytes @ 0x0 Read: OK >> >> => cmp.b 0x3000000 0x100 0x1000000 >> >> Total of 16777216 byte(s) were the same > > How about this log. Looks like you have already tested. > Is it just message or you copied the log?
I have verified it on microzed, just wanted to verify from your side on zc70x if possible? thanks! -- Jagan. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
