On Wednesday, September 09, 2015 at 11:02:45 PM, Fabio Estevam wrote: > Hi, > > I am trying to add fastboot support for mx6qsabresd and I did the > following changes on against top of head U-boot: > > --- a/include/configs/mx6sabre_common.h > +++ b/include/configs/mx6sabre_common.h > @@ -238,6 +238,12 @@ > #define CONFIG_G_DNL_VENDOR_NUM 0x0525 > #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 > #define CONFIG_G_DNL_MANUFACTURER "FSL" > + > +#define CONFIG_USB_FUNCTION_FASTBOOT > +#define CONFIG_CMD_FASTBOOT > +#define CONFIG_ANDROID_BOOT_IMAGE > +#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR > +#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000 > #endif > > #endif /* __MX6QSABRE_COMMON_CONFIG_H */ > > On the U-boot prompt I run: > > => fastboot 0 > > and then in the host PC I try to read the bootloader version: > > $ fastboot getvar bootloader-version > < waiting for device > > > (and it gets stuck here) > > After a CTRL+C I have also tried: > > $ sudo fastboot devices > $ > > ,but nothing is reported. > > I am able to mount the SD card via 'ums 0 mmc 1' command, so the USB > OTG connection is fine. > > Does anyone have any suggestions?
Don't you need this patch from Peng? [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback https://patchwork.ozlabs.org/patch/511739/ Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
