Hi Fabio,
On 09/10/2015 05:02 AM, Fabio Estevam wrote:
Hi,
I am trying to add fastboot support for mx6qsabresd and I did the
following changes on against top of head U-boot:
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -238,6 +238,12 @@
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "FSL"
+
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
#endif
#endif /* __MX6QSABRE_COMMON_CONFIG_H */
On the U-boot prompt I run:
=> fastboot 0
and then in the host PC I try to read the bootloader version:
$ fastboot getvar bootloader-version
< waiting for device >
Please check whether the fastboot application supports your vendor ID.
If not, add "-i <vendor_id> in your command line.
Best Regards,
Bo Shen
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot