Hello, Jaehoon Chung wrote: > Hi, > > On 09/21/2015 08:18 AM, Tobias Jakobi wrote: >> Hello, >> >> currently operation on Exynos4412-based Odroid devices is broken. >> >> The bootloader stops with this message: >> Card did not respond to voltage select! >> *** Warning - MMC init failed, using default environment > > Which board did you use? and Which cad is failed? SD or eMMC? This is an Odroid-X2. I'm booting from SD with a Sandisk Extreme. I don't have any eMMC here.
Actually it was some other person who encountered this issue with his Odroid-X2 and booting from SD. After he made me aware of it, I also updated my u-boot (I was then using a version from May 2015, which works perfectly btw) and encountered the very same issue as him. > Your [PATCH 4/4] is strange..so i want to get more information. For me it restores proper operation of the bootloader to the board. With best wishes, Tobias > > If you can share more information, i can explain more exactly about your > problem. > > Best Regards, > Jaehoon Chung > >> >> This series fixes error handling in the s5p sdhci driver >> and the cause of the issue, which is an inverted card >> detection check. >> >> Thanks goes to Marek Vasut and Sjoerd Simons who helped >> me on IRC to get this triaged. >> >> With best wishes, >> Tobias >> >> Tobias Jakobi (4): >> exynos: Properly initialize host_caps in s5p_sdhci_core_init() >> exynos: Fix passing of errors in exynos_mmc_init() >> exynos: be more verbose in process_nodes() >> exynos: fix and cleanup do_sdhci_init() >> >> drivers/mmc/s5p_sdhci.c | 39 +++++++++++++++++++++++---------------- >> 1 file changed, 23 insertions(+), 16 deletions(-) >> > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
