On Thu, Oct 29, 2015 at 9:07 AM, Stefano Babic <[email protected]> wrote: > On 29/10/2015 11:58, Otavio Salvador wrote: >> On Thu, Oct 29, 2015 at 8:53 AM, Stefano Babic <[email protected]> wrote: >>> Hi Otavio, >>> >>> On 29/10/2015 11:32, Otavio Salvador wrote: >>>> Congatec has several MX6 boards based on quad, dual, dual-lite and solo. >>>> >>>> Add SPL support so that all the variants can be supported. >>>> >>>> Signed-off-by: Otavio Salvador <[email protected]> >> ... >>>> --- a/board/congatec/cgtqmx6eval/README >>>> +++ b/board/congatec/cgtqmx6eval/README >> ... >>>> +=> sf update 0x12000000 0x400 0x10000 >>>> + >>>> +=> tftp u-boot.img >>> >>> Just a nitpick. This assumes that loadaddr is set to 0x12000000, as it >>> is in mx6_common.h. If value changes, it is not strictly correct. Maybe >>> to avoid confusion, you can write "tftp 0x12000000 SPL" (explicitely >>> address it) or you change sf update to use the loadaddr variable as "sf >>> update ${loadaddr} 0x400 0x10000" >> >> Can you replace it with ${loadaddr} when applying or do you want a new >> patch revision? > > Yes, of course - I'll do it, you do not need to repost it for this.
Bear in mind, this required Fabio's patches for SPI protection. -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
