From: Holger Brunck <[email protected]> We use the same settings for open firmware defines on all our powerpc targets, so move them from the CPU specific headers to the common powerpc header.
Signed-off-by: Holger Brunck <[email protected]> Signed-off-by: Valentin Longchamp <[email protected]> --- Changes in v2: None include/configs/km/km-powerpc.h | 4 ++++ include/configs/km/km83xx-common.h | 3 --- include/configs/km82xx.h | 3 --- 3 files changed, 4 insertions(+), 6 deletions(-) diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 8121e5c..cf4a91c 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -17,6 +17,10 @@ #define CONFIG_CMD_DTT #define CONFIG_JFFS2_CMDLINE +/* Pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP + /* standard km ethernet_present for piggy */ #define CONFIG_KM_COMMON_ETH_INIT diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h index 940000e..2325451 100644 --- a/include/configs/km/km83xx-common.h +++ b/include/configs/km/km83xx-common.h @@ -153,9 +153,6 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT -#define CONFIG_OF_BOARD_SETUP #define CONFIG_OF_STDOUT_VIA_ALIAS /* diff --git a/include/configs/km82xx.h b/include/configs/km82xx.h index 12f9d42..8c06dc1 100644 --- a/include/configs/km82xx.h +++ b/include/configs/km82xx.h @@ -431,10 +431,7 @@ int get_scl(void); #define CONFIG_SYS_RESET_ADDRESS 0xFDFFFFFC /* "bad" address */ -/* pass open firmware flat tree */ #define CONFIG_FIT 1 -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 #define OF_TBCLK (bd->bi_busfreq / 4) #define OF_STDOUT_PATH "/soc/cpm/serial@11a90" -- 1.8.3.1 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
