From: Holger Brunck <[email protected]>

On mgcoge3ne we also want to start the test application if the testpin
is asserted. But we don't have a full POST test support yet. So simply
add a function to read the testpin value.

Signed-off-by: Holger Brunck <[email protected]>
Signed-off-by: Valentin Longchamp <[email protected]>
---

Changes in v2: None

 board/keymile/common/common.c | 5 ++++-
 board/keymile/common/common.h | 2 ++
 board/keymile/km82xx/km82xx.c | 9 +++++++++
 3 files changed, 15 insertions(+), 1 deletion(-)

diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c
index b9aff1a..8de129d 100644
--- a/board/keymile/common/common.c
+++ b/board/keymile/common/common.c
@@ -354,8 +354,11 @@ static int do_checktestboot(cmd_tbl_t *cmdtp, int flag, 
int argc,
 
 #if defined(CONFIG_POST)
        testpin = post_hotkeys_pressed();
-       s = getenv("test_bank");
 #endif
+#if defined(CONFIG_MGCOGE3NE)
+       testpin = get_testpin();
+#endif
+       s = getenv("test_bank");
        /* when test_bank is not set, act as if testpin is not asserted */
        testboot = (testpin != 0) && (s);
        if (verbose) {
diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h
index dcfefc4..c74f569 100644
--- a/board/keymile/common/common.h
+++ b/board/keymile/common/common.h
@@ -134,6 +134,8 @@ int wait_for_fpga_config(void);
 int fpga_reset(void);
 int toggle_eeprom_spi_bus(void);
 
+int get_testpin(void);
+
 int set_km_env(void);
 int fdt_set_node_and_value(void *blob,
                        char *nodename,
diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index 03cd10c..cc9a7c9 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -473,3 +473,12 @@ int ft_board_setup(void *blob, bd_t *bd)
        return 0;
 }
 #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */
+
+#if defined(CONFIG_MGCOGE3NE)
+int get_testpin(void)
+{
+       /* Testpin is Port C pin 29 - enable = low */
+       int testpin = !get_pin(0x00000004, 2);
+       return testpin;
+}
+#endif
-- 
1.8.3.1

_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to