[U-Boot] [PATCH 1/2] spi: kirkwood_spi.c: Prepare for driver model support

[Stefan Roese]

This patch prepares the Kirkwood SPI driver, also used on the MVEBU board
(Armada XP / 38x), for the conversion to driver model.

Signed-off-by: Stefan Roese <s...@denx.de>
Cc: Valentin Longchamp <valentin.longch...@keymile.com>
Cc: Luka Perkov <luka.per...@sartura.hr>
Cc: Jagan Teki <jt...@openedev.com>
Cc: Simon Glass <s...@chromium.org>
---
 drivers/spi/kirkwood_spi.c | 41 ++++++++++++++++++++++++++++-------------
 1 file changed, 28 insertions(+), 13 deletions(-)

diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c
index e7b0982..08bf432 100644
--- a/drivers/spi/kirkwood_spi.c
+++ b/drivers/spi/kirkwood_spi.c
@@ -145,33 +145,42 @@ void spi_init(void)
 {
 }
 
+static void _spi_cs_activate(struct kwspi_registers *reg)
+{
+       setbits_le32(&reg->ctrl, KWSPI_CSN_ACT);
+}
+
+static void _spi_cs_deactivate(struct kwspi_registers *reg)
+{
+       clrbits_le32(&reg->ctrl, KWSPI_CSN_ACT);
+}
+
 void spi_cs_activate(struct spi_slave *slave)
 {
-       setbits_le32(&spireg->ctrl, KWSPI_CSN_ACT);
+       _spi_cs_activate(spireg);
 }
 
 void spi_cs_deactivate(struct spi_slave *slave)
 {
-       clrbits_le32(&spireg->ctrl, KWSPI_CSN_ACT);
+       _spi_cs_deactivate(spireg);
 }
 
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
-            void *din, unsigned long flags)
+static int _spi_xfer(struct kwspi_registers *reg, unsigned int bitlen,
+                    const void *dout, void *din, unsigned long flags)
 {
        unsigned int tmpdout, tmpdin;
        int tm, isread = 0;
 
-       debug("spi_xfer: slave %u:%u dout %p din %p bitlen %u\n",
-             slave->bus, slave->cs, dout, din, bitlen);
+       debug("spi_xfer: dout %p din %p bitlen %u\n", dout, din, bitlen);
 
        if (flags & SPI_XFER_BEGIN)
-               spi_cs_activate(slave);
+               _spi_cs_activate(reg);
 
        /*
         * handle data in 8-bit chunks
         * TBD: 2byte xfer mode to be enabled
         */
-       clrsetbits_le32(&spireg->cfg, KWSPI_XFERLEN_MASK, KWSPI_XFERLEN_1BYTE);
+       clrsetbits_le32(&reg->cfg, KWSPI_XFERLEN_MASK, KWSPI_XFERLEN_1BYTE);
 
        while (bitlen > 4) {
                debug("loopstart bitlen %d\n", bitlen);
@@ -181,8 +190,8 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, 
const void *dout,
                if (dout)
                        tmpdout = *(u32 *)dout & 0xff;
 
-               clrbits_le32(&spireg->irq_cause, KWSPI_SMEMRDIRQ);
-               writel(tmpdout, &spireg->dout); /* Write the data out */
+               clrbits_le32(&reg->irq_cause, KWSPI_SMEMRDIRQ);
+               writel(tmpdout, &reg->dout);    /* Write the data out */
                debug("*** spi_xfer: ... %08x written, bitlen %d\n",
                      tmpdout, bitlen);
 
@@ -192,9 +201,9 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, 
const void *dout,
                 * The NE event must be read and cleared first
                 */
                for (tm = 0, isread = 0; tm < KWSPI_TIMEOUT; ++tm) {
-                       if (readl(&spireg->irq_cause) & KWSPI_SMEMRDIRQ) {
+                       if (readl(&reg->irq_cause) & KWSPI_SMEMRDIRQ) {
                                isread = 1;
-                               tmpdin = readl(&spireg->din);
+                               tmpdin = readl(&reg->din);
                                debug("spi_xfer: din %p..%08x read\n",
                                      din, tmpdin);
 
@@ -216,7 +225,13 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, 
const void *dout,
        }
 
        if (flags & SPI_XFER_END)
-               spi_cs_deactivate(slave);
+               _spi_cs_deactivate(reg);
 
        return 0;
 }
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+            const void *dout, void *din, unsigned long flags)
+{
+       return _spi_xfer(spireg, bitlen, dout, din, flags);
+}
-- 
2.6.3

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot