On Friday, December 18, 2015 at 09:50:09 AM, 圣江 吴 wrote: > On Dec 18, 2015, at 12:46 AM, Chin Liang See <[email protected]> wrote: > > Hi Shengjiang, > > On Fri, 2015-12-18 at 16:43 +0800, shengjiangwu wrote: > Updated pinmux group MIXED1IO[0-13] for RGMII1. > Updated EMAC1 clock. > > Signed-off-by: shengjiangwu <[email protected]> > Cc: Chin Liang See <[email protected]> > Cc: Dinh Nguyen <[email protected]> > Cc: Dinh Nguyen <[email protected]> > Cc: Pavel Machek <[email protected]> > Cc: Marek Vasut <[email protected]> > Cc: Stefan Roese <[email protected]> > --- > Changes for v2: > - fixed wrong perpll for emac1 > --- > board/altera/cyclone5-socdk/qts/pll_config.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/board/altera/cyclone5-socdk/qts/pll_config.h > b/board/altera/cyclone5-socdk/qts/pll_config.h > index eccc705..5b754ac 100644 > --- a/board/altera/cyclone5-socdk/qts/pll_config.h > +++ b/board/altera/cyclone5-socdk/qts/pll_config.h > @@ -65,7 +65,7 @@ > #define CONFIG_HPS_CLK_PERVCO_HZ 1000000000 > #define CONFIG_HPS_CLK_SDRVCO_HZ 666666666 > #define CONFIG_HPS_CLK_EMAC0_HZ 250000000 > -#define CONFIG_HPS_CLK_EMAC1_HZ 50000000 > +#define CONFIG_HPS_CLK_EMAC1_HZ 250000000 > > > This is good. But I believe you miss the pinmux change here. You just > need to take the previous patch and made the change. > > Thanks > Chin Liang > > Sorry for not familiar with re-patch process.
Take a look at 'git rebase -i' and 'git commit --amend' and at the 'tig' command and then probably 'patchman' in the U-Boot source tree. These might be helpful. Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
