On Dec 18, 2015, at 12:46 AM, Chin Liang See <[email protected]> wrote:
Hi Shengjiang,
On Fri, 2015-12-18 at 16:43 +0800, shengjiangwu wrote:
Updated pinmux group MIXED1IO[0-13] for RGMII1.
Updated EMAC1 clock.
Signed-off-by: shengjiangwu <[email protected]>
Cc: Chin Liang See <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Dinh Nguyen <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Marek Vasut <[email protected]>
Cc: Stefan Roese <[email protected]>
---
Changes for v2:
- fixed wrong perpll for emac1
---
board/altera/cyclone5-socdk/qts/pll_config.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/altera/cyclone5-socdk/qts/pll_config.h
b/board/altera/cyclone5-socdk/qts/pll_config.h
index eccc705..5b754ac 100644
--- a/board/altera/cyclone5-socdk/qts/pll_config.h
+++ b/board/altera/cyclone5-socdk/qts/pll_config.h
@@ -65,7 +65,7 @@
#define CONFIG_HPS_CLK_PERVCO_HZ 1000000000
#define CONFIG_HPS_CLK_SDRVCO_HZ 666666666
#define CONFIG_HPS_CLK_EMAC0_HZ 250000000
-#define CONFIG_HPS_CLK_EMAC1_HZ 50000000
+#define CONFIG_HPS_CLK_EMAC1_HZ 250000000
This is good. But I believe you miss the pinmux change here. You just
need to take the previous patch and made the change.
Thanks
Chin Liang
Sorry for not familiar with re-patch process.
Best Regards
Shengjiangwu
#define CONFIG_HPS_CLK_USBCLK_HZ 200000000
#define CONFIG_HPS_CLK_NAND_HZ 50000000
#define CONFIG_HPS_CLK_SDMMC_HZ 200000000
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
