On Monday, December 21, 2015 at 05:08:17 PM, Chin Liang See wrote:
> Update the qspiboot console command to use UBIFS instead
> of old jffs2 file system.
>
> Signed-off-by: Chin Liang See <[email protected]>
> Cc: Dinh Nguyen <[email protected]>
> Cc: Dinh Nguyen <[email protected]>
> Cc: Pavel Machek <[email protected]>
> Cc: Marek Vasut <[email protected]>
> Cc: Stefan Roese <[email protected]>
> ---
> include/configs/socfpga_cyclone5_socdk.h | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/include/configs/socfpga_cyclone5_socdk.h
> b/include/configs/socfpga_cyclone5_socdk.h index 61450cb..a0f62ef 100644
> --- a/include/configs/socfpga_cyclone5_socdk.h
> +++ b/include/configs/socfpga_cyclone5_socdk.h
> @@ -71,11 +71,9 @@
> "load mmc 0:1 ${loadaddr} ${bootimage};" \
> "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
> "qspiload=sf probe; mtdparts default;run ubiload\0" \
> - "qspiroot=/dev/mtdblock0\0" \
> - "qspirootfstype=jffs2\0" \
> "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
> - " root=${qspiroot} rw rootfstype=${qspirootfstype};"\
> - "bootm ${loadaddr} - ${fdt_addr}\0" \
> + " ubi.mtd=1,64 root=ubi0:rootfs rw rootfstype=ubifs;"\
Why do you use 1,64 ? Just use /dev/mtdN , no ?
> + "bootz ${loadaddr} - ${fdt_addr}\0" \
> "ubiload=ubi part UBI; ubifsmount ubi0;" \
> "ubifsload ${loadaddr} /boot/${bootimage};" \
> "ubifsload ${fdt_addr} /boot/${fdtimage}\0"
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
