On Tuesday, December 22, 2015 at 01:32:26 AM, Chin Liang See wrote: > On Tue, 2015-12-22 at 00:14 +0100, Marek Vasut wrote: > > On Monday, December 21, 2015 at 05:08:17 PM, Chin Liang See wrote: > > > Update the qspiboot console command to use UBIFS instead > > > of old jffs2 file system. > > > > > > Signed-off-by: Chin Liang See <[email protected]> > > > Cc: Dinh Nguyen <[email protected]> > > > Cc: Dinh Nguyen <[email protected]> > > > Cc: Pavel Machek <[email protected]> > > > Cc: Marek Vasut <[email protected]> > > > Cc: Stefan Roese <[email protected]> > > > --- > > > > > > include/configs/socfpga_cyclone5_socdk.h | 6 ++---- > > > 1 file changed, 2 insertions(+), 4 deletions(-) > > > > > > diff --git a/include/configs/socfpga_cyclone5_socdk.h > > > b/include/configs/socfpga_cyclone5_socdk.h index 61450cb..a0f62ef > > > 100644 > > > --- a/include/configs/socfpga_cyclone5_socdk.h > > > +++ b/include/configs/socfpga_cyclone5_socdk.h > > > @@ -71,11 +71,9 @@ > > > > > > "load mmc 0:1 ${loadaddr} ${bootimage};" \ > > > "load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \ > > > > > > "qspiload=sf probe; mtdparts default;run ubiload\0" \ > > > > > > - "qspiroot=/dev/mtdblock0\0" \ > > > - "qspirootfstype=jffs2\0" \ > > > > > > "qspiboot=setenv bootargs " CONFIG_BOOTARGS \ > > > > > > - " root=${qspiroot} rw > > > rootfstype=${qspirootfstype};"\ > > > - "bootm ${loadaddr} - ${fdt_addr}\0" \ > > > + " ubi.mtd=1,64 root=ubi0:rootfs rw > > > rootfstype=ubifs;"\ > > > > Why do you use 1,64 ? Just use /dev/mtdN , no ? > > I tried and Linux claim unknown block. Quick grep the Linux dts and > everyone is using similar way where 1 indicate mtd1 and 64 indicate > page size.
OK, I see. I didn't know you can specify the block size that way, nice :) Best regards, Marek Vasut _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
