On Sunday, December 27, 2015 at 07:36:00 AM, Wills Wang wrote: > On 12/26/2015 09:52 PM, Daniel Schwierzeck wrote: > > Am 25.12.2015 um 19:56 schrieb Wills Wang: > >> Signed-off-by: Wills Wang <[email protected]>
[...] > >> diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig > >> new file mode 100644 > >> index 0000000..cec0bb7 > >> --- /dev/null > >> +++ b/configs/ap121_defconfig > >> @@ -0,0 +1,42 @@ > >> +CONFIG_MIPS=y > >> +CONFIG_TARGET_AP121=y > >> +CONFIG_SYS_MALLOC_F_LEN=0x2000 > >> +CONFIG_SYS_PROMPT="ap121 # " > >> +CONFIG_OF_CONTROL=y > >> +CONFIG_DEFAULT_DEVICE_TREE="ap121" > >> +CONFIG_DM=y > > > > options like CONFIG_OF_CONTROL and CONFIG_DM should be pre-selected by > > the mach or SoC specific Kconfig file if you always require it. An user > > of your board should not be able to disable those options. > > > >> +CONFIG_DM_SERIAL=y > >> +CONFIG_DM_SPI=y > >> +CONFIG_DM_SPI_FLASH=y > >> +CONFIG_ATH79_SPI=y > >> +CONFIG_SPI_FLASH=y > >> +CONFIG_SPI_FLASH_BAR=y > >> +CONFIG_SPI_FLASH_ATMEL=y > >> +CONFIG_SPI_FLASH_EON=y > >> +CONFIG_SPI_FLASH_GIGADEVICE=y > >> +CONFIG_SPI_FLASH_MACRONIX=y > >> +CONFIG_SPI_FLASH_SPANSION=y > >> +CONFIG_SPI_FLASH_STMICRO=y > >> +CONFIG_SPI_FLASH_SST=y > >> +CONFIG_SPI_FLASH_WINBOND=y > >> +CONFIG_SPI_FLASH_USE_4K_SECTORS=y > >> +CONFIG_SPI_FLASH_DATAFLASH=y > >> +CONFIG_SPI_FLASH_MTD=y > >> +CONFIG_CMD_DM=y > >> +CONFIG_CMD_SF=y > >> +CONFIG_CMD_SPI=y > >> +# CONFIG_NET is not set > >> +# CONFIG_CMD_BDI is not set > >> +# CONFIG_CMD_CONSOLE is not set > >> +# CONFIG_CMD_IMLS is not set > >> +# CONFIG_CMD_XIMG is not set > >> +# CONFIG_CMD_ELF is not set > >> +# CONFIG_CMD_EXPORTENV is not set > >> +# CONFIG_CMD_IMPORTENV is not set > >> +# CONFIG_CMD_EDITENV is not set > >> +# CONFIG_CMD_CRC32 is not set > >> +# CONFIG_CMD_FLASH is not set > >> +# CONFIG_CMD_FPGA is not set > >> +# CONFIG_CMD_NFS is not set > >> +# CONFIG_CMD_NET is not set > >> +CONFIG_USE_PRIVATE_LIBGCC=y Why is private libgcc enabled here ? Is your toolchain buggy ? > >> diff --git a/include/configs/ap121.h b/include/configs/ap121.h > >> new file mode 100644 > >> index 0000000..5a01d11 > >> --- /dev/null > >> +++ b/include/configs/ap121.h > >> @@ -0,0 +1,82 @@ > >> +#ifndef __CONFIG_H > >> +#define __CONFIG_H > >> + > >> +#include <linux/kconfig.h> > >> +#include <linux/sizes.h> > > > > those includes are not needed in a board config header file respectively > > they are already included implicitely > > > >> + > >> +#define CONFIG_ARCH_ATH79 > >> +#define CONFIG_SOC_AR933X > > > > this is already configured by Kconfig > > > >> + > >> +#define CONFIG_DISPLAY_CPUINFO > >> +#define CONFIG_DISPLAY_BOARDINFO > >> + > >> +#define CONFIG_OF_LIBFDT > >> + > >> +#define CONFIG_SYS_HZ 1000 > >> +#define CONFIG_SYS_MHZ 200 > >> +#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) > >> + > >> +/* Cache Configuration */ > >> +#define CONFIG_SYS_DCACHE_SIZE 32 * SZ_1K > >> +#define CONFIG_SYS_ICACHE_SIZE 64 * SZ_1K > >> +#define CONFIG_SYS_CACHELINE_SIZE 32 > > > > you can drop this, the cache sizes will be detected automatically > > My board don't boot up if drop this. btw please use the [...] to trim your reply to relevant parts only, it's often real hard to find the relevant one-liner reply in a sea of quoted text. [...] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
