On Sunday, December 27, 2015 at 08:03:55 AM, Wills Wang wrote: > On 12/27/2015 02:41 PM, Marek Vasut wrote: > > On Sunday, December 27, 2015 at 07:36:00 AM, Wills Wang wrote: > >> On 12/26/2015 09:52 PM, Daniel Schwierzeck wrote: > >>> Am 25.12.2015 um 19:56 schrieb Wills Wang: > >>>> Signed-off-by: Wills Wang <[email protected]> > > > > [...] > > > >>>> diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig > >>>> new file mode 100644 > >>>> index 0000000..cec0bb7 > >>>> --- /dev/null > >>>> +++ b/configs/ap121_defconfig > >>>> @@ -0,0 +1,42 @@ > >>>> +CONFIG_MIPS=y > >>>> +CONFIG_TARGET_AP121=y > >>>> +CONFIG_SYS_MALLOC_F_LEN=0x2000 > >>>> +CONFIG_SYS_PROMPT="ap121 # " > >>>> +CONFIG_OF_CONTROL=y > >>>> +CONFIG_DEFAULT_DEVICE_TREE="ap121" > >>>> +CONFIG_DM=y > >>> > >>> options like CONFIG_OF_CONTROL and CONFIG_DM should be pre-selected by > >>> the mach or SoC specific Kconfig file if you always require it. An user > >>> of your board should not be able to disable those options. > >>> > >>>> +CONFIG_DM_SERIAL=y > >>>> +CONFIG_DM_SPI=y > >>>> +CONFIG_DM_SPI_FLASH=y > >>>> +CONFIG_ATH79_SPI=y > >>>> +CONFIG_SPI_FLASH=y > >>>> +CONFIG_SPI_FLASH_BAR=y > >>>> +CONFIG_SPI_FLASH_ATMEL=y > >>>> +CONFIG_SPI_FLASH_EON=y > >>>> +CONFIG_SPI_FLASH_GIGADEVICE=y > >>>> +CONFIG_SPI_FLASH_MACRONIX=y > >>>> +CONFIG_SPI_FLASH_SPANSION=y > >>>> +CONFIG_SPI_FLASH_STMICRO=y > >>>> +CONFIG_SPI_FLASH_SST=y > >>>> +CONFIG_SPI_FLASH_WINBOND=y > >>>> +CONFIG_SPI_FLASH_USE_4K_SECTORS=y > >>>> +CONFIG_SPI_FLASH_DATAFLASH=y > >>>> +CONFIG_SPI_FLASH_MTD=y > >>>> +CONFIG_CMD_DM=y > >>>> +CONFIG_CMD_SF=y > >>>> +CONFIG_CMD_SPI=y > >>>> +# CONFIG_NET is not set > >>>> +# CONFIG_CMD_BDI is not set > >>>> +# CONFIG_CMD_CONSOLE is not set > >>>> +# CONFIG_CMD_IMLS is not set > >>>> +# CONFIG_CMD_XIMG is not set > >>>> +# CONFIG_CMD_ELF is not set > >>>> +# CONFIG_CMD_EXPORTENV is not set > >>>> +# CONFIG_CMD_IMPORTENV is not set > >>>> +# CONFIG_CMD_EDITENV is not set > >>>> +# CONFIG_CMD_CRC32 is not set > >>>> +# CONFIG_CMD_FLASH is not set > >>>> +# CONFIG_CMD_FPGA is not set > >>>> +# CONFIG_CMD_NFS is not set > >>>> +# CONFIG_CMD_NET is not set > >>>> +CONFIG_USE_PRIVATE_LIBGCC=y > > > > Why is private libgcc enabled here ? Is your toolchain buggy ? > > Follow from dbau1000_defconfig.
Daniel, can you clarify why this is enabled ? [...] _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
