From: Fabio Estevam <fabio.este...@nxp.com>
As per the AR8035 datasheet:
"For a reliable power on reset, suggest to keep asserting the reset
low long enough (10ms) to ensure the clock is stable and clock-to-reset
1ms requirement is satisfied."
So do as suggested and keep the reset low for 10ms.
Signed-off-by: Fabio Estevam <fabio.este...@nxp.com>
---
board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c
b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index fc37f1e..20faffc 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -143,7 +143,7 @@ static void setup_iomux_enet(void)
SETUP_IOMUX_PADS(enet_pads);
gpio_direction_output(ETH_PHY_RESET, 0);
- mdelay(2);
+ mdelay(10);
gpio_set_value(ETH_PHY_RESET, 1);
}
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
