On Thu, Jan 14, 2016 at 02:36:52PM +0100, Michal Simek wrote: > Enable automatic crossover cable detection. > > Signed-off-by: Michal Simek <[email protected]>
Reviewed-by: Edgar E. Iglesias <[email protected]> > --- > > drivers/net/phy/ti.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c > index 541a57f98028..c3912d52f320 100644 > --- a/drivers/net/phy/ti.c > +++ b/drivers/net/phy/ti.c > @@ -41,6 +41,8 @@ > > /* PHY CTRL bits */ > #define DP83867_PHYCR_FIFO_DEPTH_SHIFT 14 > +#define DP83867_MDI_CROSSOVER 5 > +#define DP83867_MDI_CROSSOVER_AUTO 2 > > /* RGMIIDCTL bits */ > #define DP83867_RGMII_TX_CLK_DELAY_SHIFT 4 > @@ -149,6 +151,7 @@ static int dp83867_config(struct phy_device *phydev) > > if (phy_interface_is_rgmii(phydev)) { > ret = phy_write(phydev, MDIO_DEVAD_NONE, MII_DP83867_PHYCTRL, > + (DP83867_MDI_CROSSOVER_AUTO << DP83867_MDI_CROSSOVER) | > (FIFO_DEPTH << DP83867_PHYCR_FIFO_DEPTH_SHIFT)); > if (ret) > return ret; > -- > 1.9.1 > _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
