Hi Stefan, On Wed, Mar 16, 2016 at 3:31 PM, Bin Meng <[email protected]> wrote: > Hi Stefan, > > On Wed, Mar 16, 2016 at 2:32 PM, Stefan Roese <[email protected]> wrote: >> Hi Bin, >> >> On 16.03.2016 03:18, Bin Meng wrote: >>> >>> On Wed, Mar 16, 2016 at 12:14 AM, Stefan Roese <[email protected]> wrote: >>>> >>>> This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, >>>> installed on the congatec Qseven 2.0 evaluation carrier board >>>> (conga-QEVAL). >>>> >>>> Its port is very similar to the MinnowboardMAX port and also uses >>>> the Intel FSP as described in doc/README.x86. >>>> >>>> Currently supported are the following interfaces / devices: >>>> - UART (via Winbond legacy SuperIO chip on carrier board) >>>> - Ethernet (PCIe Intel I210 / E1000) >>>> - SPI including SPI NOR as boot-device >>>> - USB 2.0 >>>> - SATA via U-Boot SCSI IF >>>> - eMMC >>>> - Video (HDMI output @ 800x600) >>>> - PCIe >>>> >>> >>> Great job to support another x86 target! >> >> >> Thanks. All possible because of your (and Simon's and others) great >> work you have done on this platform in the last years. :) >> > > [snip] > >>>> diff --git a/board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c >>>> b/board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c >>>> new file mode 100644 >>>> index 0000000..ab6883e >>>> --- /dev/null >>>> +++ b/board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c >>>> @@ -0,0 +1,39 @@ >>>> +/* >>>> + * Copyright (C) 2016 Stefan Roese <[email protected]> >>>> + * >>>> + * SPDX-License-Identifier: GPL-2.0+ >>>> + */ >>>> + >>>> +#include <common.h> >>>> +#include <winbond_w83627.h> >>>> +#include <asm/gpio.h> >>>> +#include <asm/ibmpc.h> >>>> +#include <asm/pnp_def.h> >>>> + >>>> +int board_early_init_f(void) >>>> +{ >>>> + /* >>>> + * The FSP enables the BayTrail internal legacy UART (again). >>>> + * Disable it again, so that the Winbond one can be used. >>>> + */ >>>> + setup_internal_uart(0); >>>> + >>>> + /* Enable the legacy UART in the Winbond W83627 Super IO chip */ >>>> + winbond_enable_serial(PNP_DEV(WINBOND_IO_PORT, W83627DHG_SP1), >>>> + UART0_BASE, UART0_IRQ); >>>> + >>>> + return 0; >>>> +} >>>> + >>>> +int arch_early_init_r(void) >>>> +{ >>>> + /* do the pin-muxing */ >>>> + gpio_ich6_pinctrl_init(); >>>> + >>> >>> >>> I guess this needs to be rebased on top of u-boot-x86/master. >> >> >> I tried and this is currently problematic since u-boot-x86/master >> does not include Simon's SPL / FIT patchset yet. And master already >> does. >> >> Could you please rebase u-boot-x86/master on top of current master? >> This would make it easy for me to generate a v2 of this congatec >> board support. > > I've just rebased u-boot-x86/master. Please have another try. > > [snip] >
BTW: just noticed that the commit title has a typo. It should be "Bay Trail", not "Bail Trail" :) Regards, Bin _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
