On Wed, Mar 16, 2016 at 3:48 PM, Stefan Roese <[email protected]> wrote: > This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, > installed on the congatec Qseven 2.0 evaluation carrier board > (conga-QEVAL). > > Its port is very similar to the MinnowboardMAX port and also uses > the Intel FSP as described in doc/README.x86. > > Currently supported are the following interfaces / devices: > - UART (via Winbond legacy SuperIO chip on carrier board) > - Ethernet (PCIe Intel I210 / E1000) > - SPI including SPI NOR as boot-device > - USB 2.0 > - SATA via U-Boot SCSI IF > - eMMC > - Video (HDMI output @ 800x600) > - PCIe > > Not supported yet is: > - I2C > - USB 3.0 > > Signed-off-by: Stefan Roese <[email protected]> > Cc: Simon Glass <[email protected]> > Cc: Bin Meng <[email protected]> > --- > v2: > - Rebased on u-boot-x86/master > - Fixed spelling of Bay Trail in commit subject > - Removed unreferenced CONFIG_WINBOND from config header > - Moved Intel E1000 from config header to defconfig > > arch/x86/Kconfig | 4 + > arch/x86/dts/Makefile | 1 + > arch/x86/dts/conga-qeval20-qa3-e3845.dts | 278 > +++++++++++++++++++++ > board/congatec/Kconfig | 29 +++ > board/congatec/conga-qeval20-qa3-e3845/Kconfig | 28 +++ > board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS | 7 + > board/congatec/conga-qeval20-qa3-e3845/Makefile | 7 + > .../conga-qeval20-qa3-e3845/conga-qeval20-qa3.c | 31 +++ > board/congatec/conga-qeval20-qa3-e3845/start.S | 9 + > configs/conga-qeval20-qa3-e3845_defconfig | 47 ++++ > include/configs/conga-qeval20-qa3-e3845.h | 65 +++++ > 11 files changed, 506 insertions(+) > create mode 100644 arch/x86/dts/conga-qeval20-qa3-e3845.dts > create mode 100644 board/congatec/Kconfig > create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Kconfig > create mode 100644 board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS > create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Makefile > create mode 100644 board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c > create mode 100644 board/congatec/conga-qeval20-qa3-e3845/start.S > create mode 100644 configs/conga-qeval20-qa3-e3845_defconfig > create mode 100644 include/configs/conga-qeval20-qa3-e3845.h >
Reviewed-by: Bin Meng <[email protected]> _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
