On Wed, Mar 16, 2016 at 4:18 PM, Bin Meng <[email protected]> wrote: > On Wed, Mar 16, 2016 at 3:48 PM, Stefan Roese <[email protected]> wrote: >> This patch adds support for the congatec conga-QA3/E3845-4G eMMC8 SoM, >> installed on the congatec Qseven 2.0 evaluation carrier board >> (conga-QEVAL). >> >> Its port is very similar to the MinnowboardMAX port and also uses >> the Intel FSP as described in doc/README.x86. >> >> Currently supported are the following interfaces / devices: >> - UART (via Winbond legacy SuperIO chip on carrier board) >> - Ethernet (PCIe Intel I210 / E1000) >> - SPI including SPI NOR as boot-device >> - USB 2.0 >> - SATA via U-Boot SCSI IF >> - eMMC >> - Video (HDMI output @ 800x600) >> - PCIe >> >> Not supported yet is: >> - I2C >> - USB 3.0 >> >> Signed-off-by: Stefan Roese <[email protected]> >> Cc: Simon Glass <[email protected]> >> Cc: Bin Meng <[email protected]> >> --- >> v2: >> - Rebased on u-boot-x86/master >> - Fixed spelling of Bay Trail in commit subject >> - Removed unreferenced CONFIG_WINBOND from config header >> - Moved Intel E1000 from config header to defconfig >> >> arch/x86/Kconfig | 4 + >> arch/x86/dts/Makefile | 1 + >> arch/x86/dts/conga-qeval20-qa3-e3845.dts | 278 >> +++++++++++++++++++++ >> board/congatec/Kconfig | 29 +++ >> board/congatec/conga-qeval20-qa3-e3845/Kconfig | 28 +++ >> board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS | 7 + >> board/congatec/conga-qeval20-qa3-e3845/Makefile | 7 + >> .../conga-qeval20-qa3-e3845/conga-qeval20-qa3.c | 31 +++ >> board/congatec/conga-qeval20-qa3-e3845/start.S | 9 + >> configs/conga-qeval20-qa3-e3845_defconfig | 47 ++++ >> include/configs/conga-qeval20-qa3-e3845.h | 65 +++++ >> 11 files changed, 506 insertions(+) >> create mode 100644 arch/x86/dts/conga-qeval20-qa3-e3845.dts >> create mode 100644 board/congatec/Kconfig >> create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Kconfig >> create mode 100644 board/congatec/conga-qeval20-qa3-e3845/MAINTAINERS >> create mode 100644 board/congatec/conga-qeval20-qa3-e3845/Makefile >> create mode 100644 >> board/congatec/conga-qeval20-qa3-e3845/conga-qeval20-qa3.c >> create mode 100644 board/congatec/conga-qeval20-qa3-e3845/start.S >> create mode 100644 configs/conga-qeval20-qa3-e3845_defconfig >> create mode 100644 include/configs/conga-qeval20-qa3-e3845.h >> > > Reviewed-by: Bin Meng <[email protected]>
rebased on top of Simon's broadwell patch series, and applied to u-boot-x86, thanks! _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
