The code in uniphier_sld3_sbc_init() is pin-muxing, so it would
be a better fit in uniphier_sld3_early_pin_init().
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
.../mach-uniphier/early-pinctrl/early-pinctrl-sld3.c | 2 ++
arch/arm/mach-uniphier/init.h | 6 ------
arch/arm/mach-uniphier/init/init-sld3.c | 3 +--
arch/arm/mach-uniphier/sbc/Makefile | 2 +-
arch/arm/mach-uniphier/sbc/sbc-sld3.c | 17 -----------------
5 files changed, 4 insertions(+), 26 deletions(-)
delete mode 100644 arch/arm/mach-uniphier/sbc/sbc-sld3.c
diff --git a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c
b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c
index 22c07fb..6c5d58f 100644
--- a/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c
+++ b/arch/arm/mach-uniphier/early-pinctrl/early-pinctrl-sld3.c
@@ -22,5 +22,7 @@ int uniphier_sld3_early_pin_init(const struct
uniphier_board_data *bd)
sg_set_pinsel(102, 2, 4, 4); /* TXD2 */
#endif
+ sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */
+
return 0;
}
diff --git a/arch/arm/mach-uniphier/init.h b/arch/arm/mach-uniphier/init.h
index 5a0ebeb..ab0a68d 100644
--- a/arch/arm/mach-uniphier/init.h
+++ b/arch/arm/mach-uniphier/init.h
@@ -37,7 +37,6 @@ int uniphier_ld20_init(const struct uniphier_board_data *bd);
#if defined(CONFIG_MICRO_SUPPORT_CARD)
int uniphier_sbc_init_admulti(const struct uniphier_board_data *bd);
int uniphier_sbc_init_savepin(const struct uniphier_board_data *bd);
-int uniphier_sld3_sbc_init(const struct uniphier_board_data *bd);
int uniphier_ld4_sbc_init(const struct uniphier_board_data *bd);
int uniphier_pxs2_sbc_init(const struct uniphier_board_data *bd);
#else
@@ -53,11 +52,6 @@ static inline int uniphier_sbc_init_savepin(
return 0;
}
-static inline int uniphier_sld3_sbc_init(const struct uniphier_board_data *bd)
-{
- return 0;
-}
-
static inline int uniphier_ld4_sbc_init(const struct uniphier_board_data *bd)
{
return 0;
diff --git a/arch/arm/mach-uniphier/init/init-sld3.c
b/arch/arm/mach-uniphier/init/init-sld3.c
index 473e0c8..6d9eb67 100644
--- a/arch/arm/mach-uniphier/init/init-sld3.c
+++ b/arch/arm/mach-uniphier/init/init-sld3.c
@@ -16,6 +16,7 @@ int uniphier_sld3_init(const struct uniphier_board_data *bd)
uniphier_sbc_init_admulti(bd);
uniphier_sld3_sbc_init(bd);
+ uniphier_sld3_early_pin_init(bd);
support_card_reset();
@@ -34,8 +35,6 @@ int uniphier_sld3_init(const struct uniphier_board_data *bd)
led_puts("L2");
- uniphier_sld3_early_pin_init(bd);
-
led_puts("L3");
#ifdef CONFIG_SPL_SERIAL_SUPPORT
diff --git a/arch/arm/mach-uniphier/sbc/Makefile
b/arch/arm/mach-uniphier/sbc/Makefile
index 236f136..38da253 100644
--- a/arch/arm/mach-uniphier/sbc/Makefile
+++ b/arch/arm/mach-uniphier/sbc/Makefile
@@ -2,7 +2,7 @@
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += sbc-admulti.o sbc-sld3.o
+obj-$(CONFIG_ARCH_UNIPHIER_SLD3) += sbc-admulti.o
obj-$(CONFIG_ARCH_UNIPHIER_LD4) += sbc-savepin.o sbc-ld4.o
obj-$(CONFIG_ARCH_UNIPHIER_PRO4) += sbc-savepin.o
obj-$(CONFIG_ARCH_UNIPHIER_SLD8) += sbc-savepin.o sbc-ld4.o
diff --git a/arch/arm/mach-uniphier/sbc/sbc-sld3.c
b/arch/arm/mach-uniphier/sbc/sbc-sld3.c
deleted file mode 100644
index ac9d030..0000000
--- a/arch/arm/mach-uniphier/sbc/sbc-sld3.c
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * Copyright (C) 2011-2015 Masahiro Yamada <yamada.masah...@socionext.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <linux/io.h>
-
-#include "../init.h"
-#include "../sg-regs.h"
-
-int uniphier_sld3_sbc_init(const struct uniphier_board_data *bd)
-{
- sg_set_pinsel(99, 1, 4, 4); /* GPIO26 -> EA24 */
-
- return 0;
-}
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
