PH1-LD20 does not have the dedicated boot swap select latch.
Instead, it is controlled from the boot mode select.
Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---
arch/arm/mach-uniphier/boot-mode/boot-mode-ld20.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-uniphier/boot-mode/boot-mode-ld20.c
b/arch/arm/mach-uniphier/boot-mode/boot-mode-ld20.c
index 100275e..b092c1b 100644
--- a/arch/arm/mach-uniphier/boot-mode/boot-mode-ld20.c
+++ b/arch/arm/mach-uniphier/boot-mode/boot-mode-ld20.c
@@ -43,7 +43,7 @@ static struct boot_device_info boot_device_table[] = {
{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training Off)"},
{BOOT_DEVICE_MMC1, "eMMC (High Speed SDR, 8bit, 1.8V, Training On)"},
{BOOT_DEVICE_MMC1, "eMMC (Legacy, 4bit, 1.8V, Training Off)"},
- {BOOT_DEVICE_NONE, "Reserved"},
+ {BOOT_DEVICE_NOR, "NOR Boot (XECS1)"},
};
static int get_boot_mode_sel(void)
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
