Hi Stefano, On Mon, May 09, 2016 at 09:30:28AM +0200, Stefano Babic wrote: >On 03/05/2016 05:13, Peng Fan wrote: >> Correct speed grading info for i.MX6UL >> >> Signed-off-by: Peng Fan <[email protected]> >> Cc: Stefano Babic <[email protected]> >> --- >> arch/arm/cpu/armv7/mx6/soc.c | 15 +++++++++++++++ >> 1 file changed, 15 insertions(+) >> >> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c >> index d4b22ad..aaa1adb 100644 >> --- a/arch/arm/cpu/armv7/mx6/soc.c >> +++ b/arch/arm/cpu/armv7/mx6/soc.c >> @@ -108,6 +108,12 @@ u32 get_cpu_rev(void) >> #define OCOTP_CFG3_SPEED_1GHZ 2 >> #define OCOTP_CFG3_SPEED_1P2GHZ 3 >> >> +/* >> + * For i.MX6UL >> + */ >> +#define OCOTP_CFG3_SPEED_528MHZ 1 >> +#define OCOTP_CFG3_SPEED_696MHZ 2 >> + >> u32 get_cpu_speed_grade_hz(void) >> { >> struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; >> @@ -120,6 +126,15 @@ u32 get_cpu_speed_grade_hz(void) >> val >>= OCOTP_CFG3_SPEED_SHIFT; >> val &= 0x3; >> >> + if (is_cpu_type(MXC_CPU_MX6UL)) { >> + if (val == OCOTP_CFG3_SPEED_528MHZ) >> + return 528000000; >> + else if (val == OCOTP_CFG3_SPEED_696MHZ) >> + return 69600000; >> + else >> + return 0; >> + } >> + >> switch (val) { >> /* Valid for IMX6DQ */ >> case OCOTP_CFG3_SPEED_1P2GHZ: >> > >Applied to -next, thanks !
Is this patch applied? I can not find this patch in next or master tree. Thanks, Peng. > >Best regards, >Stefano Babic > >-- >===================================================================== >DENX Software Engineering GmbH, Managing Director: Wolfgang Denk >HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany >Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] >===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
