On 18/05/2016 07:45, Peng Fan wrote: > Hi Stefano, > > On Mon, May 09, 2016 at 09:30:28AM +0200, Stefano Babic wrote: >> On 03/05/2016 05:13, Peng Fan wrote: >>> Correct speed grading info for i.MX6UL >>> >>> Signed-off-by: Peng Fan <[email protected]> >>> Cc: Stefano Babic <[email protected]> >>> --- >>> arch/arm/cpu/armv7/mx6/soc.c | 15 +++++++++++++++ >>> 1 file changed, 15 insertions(+) >>> >>> diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c >>> index d4b22ad..aaa1adb 100644 >>> --- a/arch/arm/cpu/armv7/mx6/soc.c >>> +++ b/arch/arm/cpu/armv7/mx6/soc.c >>> @@ -108,6 +108,12 @@ u32 get_cpu_rev(void) >>> #define OCOTP_CFG3_SPEED_1GHZ 2 >>> #define OCOTP_CFG3_SPEED_1P2GHZ 3 >>> >>> +/* >>> + * For i.MX6UL >>> + */ >>> +#define OCOTP_CFG3_SPEED_528MHZ 1 >>> +#define OCOTP_CFG3_SPEED_696MHZ 2 >>> + >>> u32 get_cpu_speed_grade_hz(void) >>> { >>> struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR; >>> @@ -120,6 +126,15 @@ u32 get_cpu_speed_grade_hz(void) >>> val >>= OCOTP_CFG3_SPEED_SHIFT; >>> val &= 0x3; >>> >>> + if (is_cpu_type(MXC_CPU_MX6UL)) { >>> + if (val == OCOTP_CFG3_SPEED_528MHZ) >>> + return 528000000; >>> + else if (val == OCOTP_CFG3_SPEED_696MHZ) >>> + return 69600000; >>> + else >>> + return 0; >>> + } >>> + >>> switch (val) { >>> /* Valid for IMX6DQ */ >>> case OCOTP_CFG3_SPEED_1P2GHZ: >>> >> >> Applied to -next, thanks ! > > Is this patch applied? I can not find this patch in next or master tree.
I have supposed, too. Thanks for reporting this, it is now on master. Best regards, Stefano -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
