With the ethernet driver model enabled, reset the device before reading the MAC address, just like it's done for the non-device-model code path. This avoids a timeout when the interface is first used.
Signed-off-by: Nikolaus Schulz <[email protected]> --- drivers/usb/eth/asix88179.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c index 7548269..0725940 100644 --- a/drivers/usb/eth/asix88179.c +++ b/drivers/usb/eth/asix88179.c @@ -878,6 +878,10 @@ static int ax88179_eth_probe(struct udevice *dev) usb_dev = priv->ueth.pusb_dev; priv->maxpacketsize = usb_dev->epmaxpacketout[AX_ENDPOINT_OUT]; + ret = asix_basic_reset(&priv->ueth, priv); + if (ret) + return ret; + /* Get the MAC address */ ret = asix_read_mac(&priv->ueth, pdata->enetaddr); if (ret) -- 2.1.4 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
