Hi, On 30 August 2016 at 08:01, Nikolaus Schulz <[email protected]> wrote: > With the ethernet driver model enabled, reset the device before reading > the MAC address, just like it's done for the non-device-model code path. > This avoids a timeout when the interface is first used. > > Signed-off-by: Nikolaus Schulz <[email protected]> > --- > drivers/usb/eth/asix88179.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/usb/eth/asix88179.c b/drivers/usb/eth/asix88179.c > index 7548269..0725940 100644 > --- a/drivers/usb/eth/asix88179.c > +++ b/drivers/usb/eth/asix88179.c > @@ -878,6 +878,10 @@ static int ax88179_eth_probe(struct udevice *dev) > usb_dev = priv->ueth.pusb_dev; > priv->maxpacketsize = usb_dev->epmaxpacketout[AX_ENDPOINT_OUT]; > > + ret = asix_basic_reset(&priv->ueth, priv); > + if (ret) > + return ret; > + > /* Get the MAC address */ > ret = asix_read_mac(&priv->ueth, pdata->enetaddr); > if (ret)
How come this doesn't happen in ax88179_eth_start()? > -- > 2.1.4 > Regards, Simon _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
