Steve/Stephen, > -----Original Message----- > From: Stephen Warren [mailto:[email protected]] > Sent: Tuesday, July 26, 2016 2:57 PM > To: Steve Arnold <[email protected]> > Cc: Stephen Arnold <[email protected]>; [email protected]; Stephen L > Arnold <[email protected]>; Tom Warren <[email protected]>; Simon > Glass <[email protected]> > Subject: Re: [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI > flash > works > > On 07/26/2016 03:45 PM, Steve Arnold wrote: > > So is there a fix to be had by maybe shifting both > > CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE a little bit? > > > > Steve > > > > On Tue, Jul 26, 2016 at 2:14 PM, Stephen Warren <[email protected] > > <mailto:[email protected]>> wrote: > > > > On 07/26/2016 12:49 PM, Steve Arnold wrote: > > > > I did mention it was black and showed nothing on serial console > > with the > > default values, ie, building as-is doesn't even show u-boot > > trying to > > load (after flashing it to the SPI flash the last thing you see is > > "Resetting..."). Power it back up and nothing happens, no > > u-boot, nada. > > > > > > It looks like there's some issue if the total flash image size is > > over 512KiB. (The physical flash chip is 1MiB). I'm investigating > > whether this is expected and what to do about it. The change to > > CONFIG_SYS_TEXT_BASE accidentally solves this, since it currently > > happens to shrink the image size enough not to hit this apparent limit. > > Changing CONFIG_SPL_TEXT_BASE won't have any effect on this; size matters > not location. > > As I mentioned, changing CONFIG_SYS_TEXT_BASE currently avoids the issue, > but hopefully we can find something better.
Was this ever resolved? If so please post an updated patch. I' like to get this out of my Patchwork queue. Thanks, Tom -- nvpublic _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
