On 09/01/2016 04:36 PM, Tom Warren wrote:
Steve/Stephen,
-----Original Message-----
From: Stephen Warren [mailto:[email protected]]
Sent: Tuesday, July 26, 2016 2:57 PM
To: Steve Arnold <[email protected]>
Cc: Stephen Arnold <[email protected]>; [email protected]; Stephen L
Arnold <[email protected]>; Tom Warren <[email protected]>; Simon
Glass <[email protected]>
Subject: Re: [U-Boot] [PATCH] Trimslice config: update for Trimslice so SPI
flash
works
On 07/26/2016 03:45 PM, Steve Arnold wrote:
So is there a fix to be had by maybe shifting both
CONFIG_SPL_TEXT_BASE and CONFIG_SYS_TEXT_BASE a little bit?
Steve
On Tue, Jul 26, 2016 at 2:14 PM, Stephen Warren <[email protected]
<mailto:[email protected]>> wrote:
On 07/26/2016 12:49 PM, Steve Arnold wrote:
I did mention it was black and showed nothing on serial console
with the
default values, ie, building as-is doesn't even show u-boot
trying to
load (after flashing it to the SPI flash the last thing you see is
"Resetting..."). Power it back up and nothing happens, no
u-boot, nada.
It looks like there's some issue if the total flash image size is
over 512KiB. (The physical flash chip is 1MiB). I'm investigating
whether this is expected and what to do about it. The change to
CONFIG_SYS_TEXT_BASE accidentally solves this, since it currently
happens to shrink the image size enough not to hit this apparent limit.
Changing CONFIG_SPL_TEXT_BASE won't have any effect on this; size matters
not location.
As I mentioned, changing CONFIG_SYS_TEXT_BASE currently avoids the issue,
but hopefully we can find something better.
Was this ever resolved? If so please post an updated patch. I' like to get this
out of my Patchwork queue.
It was superseded by "ARM: tegra: fix trimslice environment location",
which is already applied.
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
