The sun8i-emac driver follows an old version of the proposed DT bindings, where the EMAC clock and EPHY control register range is listed directly, rather than through a syscon phandle.
Add back the syscon register range to avoid an invalid data access. We should fix the driver once the Linux kernel bindings have been finalized. Signed-off-by: Chen-Yu Tsai <[email protected]> --- arch/arm/dts/sun8i-h3.dtsi | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index 6babaf37177f..afa60793a235 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -466,9 +466,8 @@ emac: ethernet@1c30000 { compatible = "allwinner,sun8i-h3-emac"; - syscon = <&syscon>; - reg = <0x01c30000 0x104>; - reg-names = "emac"; + reg = <0x01c30000 0x104>, <0x01c00030 0x4>; + reg-names = "emac", "syscon"; interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>; reset-names = "ahb", "ephy"; -- 2.9.3 _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
