Hi,
On 02-09-16 10:29, Chen-Yu Tsai wrote:
The sun8i-emac driver follows an old version of the proposed DT
bindings, where the EMAC clock and EPHY control register range is
listed directly, rather than through a syscon phandle.
Add back the syscon register range to avoid an invalid data access.
We should fix the driver once the Linux kernel bindings have been
finalized.
Signed-off-by: Chen-Yu Tsai <[email protected]>
Thanks, applied to my local tree and this will be part of the
v2016.09 pullreq I plan to send out later today.
Regards,
Hans
---
arch/arm/dts/sun8i-h3.dtsi | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi
index 6babaf37177f..afa60793a235 100644
--- a/arch/arm/dts/sun8i-h3.dtsi
+++ b/arch/arm/dts/sun8i-h3.dtsi
@@ -466,9 +466,8 @@
emac: ethernet@1c30000 {
compatible = "allwinner,sun8i-h3-emac";
- syscon = <&syscon>;
- reg = <0x01c30000 0x104>;
- reg-names = "emac";
+ reg = <0x01c30000 0x104>, <0x01c00030 0x4>;
+ reg-names = "emac", "syscon";
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
resets = <&ccu RST_BUS_EMAC>, <&ccu RST_BUS_EPHY>;
reset-names = "ahb", "ephy";
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
