Hi Peng, On Sat, Sep 3, 2016 at 3:38 PM, Peng Fan <[email protected]> wrote: > Hi Jagan, > > On Sat, Sep 03, 2016 at 01:52:57PM +0530, Jagan Teki wrote: >>i.MX6UL GEA M6UL modules are system on module solutions manufactured >>by Engicam with following characteristics: >>Processor NXP i.MX 6UltraLite MCIMX6G2, 528 MHz >>RAM 128MB, 16-bit DDR3 >>NAND SLC 256MB >>Power supply Single 5V >>MAX LCD RES up to WXGA, 1366x768 >> >>Cc: Stefano Babic <[email protected]> >>Cc: Peng Fan <[email protected]> >>Cc: Michael Trimarchi <[email protected]> >>Signed-off-by: Jagan Teki <[email protected]> >>--- >> arch/arm/cpu/armv7/mx6/Kconfig | 6 ++++++ >> board/freescale/mx6ul/Kconfig | 2 +- >> board/freescale/mx6ul/MAINTAINERS | 5 +++++ >> board/freescale/mx6ul/board.c | 4 +++- >> configs/mx6ul_geam_kit_defconfig | 11 +++++++++++ >> include/configs/mx6ul.h | 1 + >> 6 files changed, 27 insertions(+), 2 deletions(-) >> create mode 100644 configs/mx6ul_geam_kit_defconfig >> >>diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig >>index 0c1bc78..d861ded 100644 >>--- a/arch/arm/cpu/armv7/mx6/Kconfig >>+++ b/arch/arm/cpu/armv7/mx6/Kconfig >>@@ -129,6 +129,12 @@ config TARGET_MX6UL_14X14_EVK >> select DM_THERMAL >> select SUPPORT_SPL >> >>+config TARGET_MX6UL_GEAM_KIT >>+ bool "mx6ul_geam_kit" >>+ select MX6UL >>+ select DM >>+ select DM_THERMAL >>+ >> config TARGET_NITROGEN6X >> bool "nitrogen6x" >> >>diff --git a/board/freescale/mx6ul/Kconfig b/board/freescale/mx6ul/Kconfig >>index f97b905..d902cd0 100644 >>--- a/board/freescale/mx6ul/Kconfig >>+++ b/board/freescale/mx6ul/Kconfig >>@@ -1,4 +1,4 @@ >>-if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK >>+if TARGET_MX6UL_14X14_EVK || TARGET_MX6UL_9X9_EVK || TARGET_MX6UL_GEAM_KIT >> >> config SYS_BOARD >> default "mx6ul" >>diff --git a/board/freescale/mx6ul/MAINTAINERS >>b/board/freescale/mx6ul/MAINTAINERS >>index 20caeee..3265858 100644 >>--- a/board/freescale/mx6ul/MAINTAINERS >>+++ b/board/freescale/mx6ul/MAINTAINERS >>@@ -5,3 +5,8 @@ F: board/freescale/mx6ul/ >> F: include/configs/mx6ul.h >> F: configs/mx6ul_14x14_evk_defconfig >> F: configs/mx6ul_9x9_evk_defconfig >>+ >>+Engicam GEAM6UL BOARD >>+M: Jagan Teki <[email protected]> >>+S: Maintained >>+F: configs/mx6ul_geam_kit_defconfig >>diff --git a/board/freescale/mx6ul/board.c b/board/freescale/mx6ul/board.c >>index 66d6795..f4e35bd 100644 >>--- a/board/freescale/mx6ul/board.c >>+++ b/board/freescale/mx6ul/board.c >>@@ -693,8 +693,10 @@ int checkboard(void) >> { >> if (is_mx6ul_9x9_evk()) >> puts("Board: MX6UL 9x9 EVK\n"); >>- else >>+ else if (is_mx6ul_14x14_evk()) >> puts("Board: MX6UL 14x14 EVK\n"); >>+ else >>+ puts("Board: MX6UL GEA KIT\n"); >> >> return 0; >> } >>diff --git a/configs/mx6ul_geam_kit_defconfig >>b/configs/mx6ul_geam_kit_defconfig >>new file mode 100644 >>index 0000000..b26f17b >>--- /dev/null >>+++ b/configs/mx6ul_geam_kit_defconfig >>@@ -0,0 +1,11 @@ >>+CONFIG_ARM=y >>+CONFIG_ARCH_MX6=y >>+CONFIG_TARGET_MX6UL_GEAM_KIT=y >>+CONFIG_HUSH_PARSER=y >>+CONFIG_SYS_PROMPT="geam6ul> " >>+CONFIG_AUTO_COMPLETE=y >>+CONFIG_SYS_MAXARGS=32 >>+CONFIG_BOOTDELAY=3 >>+CONFIG_BOARD_EARLY_INIT_F=y >>+CONFIG_BOARD_LATE_INIT=y >>+# CONFIG_CMD_IMLS is not set > > I think you missed ddr script settings, SPL or DCD?
True - I will update the code once I tested on board and the reason for sending this series earlier is to make an approval of existing file name changes. Will that be OK? Jagan. -- Jagan Teki Free Software Engineer | Amarula Solutions U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
