DT-side updates to make pinctrl on sLD3 SoC really available.

Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>
---

 arch/arm/dts/uniphier-ph1-sld3-ref.dts |  8 ++++++++
 arch/arm/dts/uniphier-ph1-sld3.dtsi    | 35 ++++++++++++++++++++++++++++++++++
 2 files changed, 43 insertions(+)

diff --git a/arch/arm/dts/uniphier-ph1-sld3-ref.dts 
b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
index 0863588..f3e76b3 100644
--- a/arch/arm/dts/uniphier-ph1-sld3-ref.dts
+++ b/arch/arm/dts/uniphier-ph1-sld3-ref.dts
@@ -93,3 +93,11 @@
 &emmc {
        u-boot,dm-pre-reloc;
 };
+
+&pinctrl_uart0 {
+       u-boot,dm-pre-reloc;
+};
+
+&pinctrl_emmc {
+       u-boot,dm-pre-reloc;
+};
diff --git a/arch/arm/dts/uniphier-ph1-sld3.dtsi 
b/arch/arm/dts/uniphier-ph1-sld3.dtsi
index 6a95541..d8c44b7 100644
--- a/arch/arm/dts/uniphier-ph1-sld3.dtsi
+++ b/arch/arm/dts/uniphier-ph1-sld3.dtsi
@@ -90,6 +90,8 @@
                        status = "disabled";
                        reg = <0x54006800 0x40>;
                        interrupts = <0 33 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_uart0>;
                        clocks = <&uart_clk>;
                        clock-frequency = <36864000>;
                };
@@ -99,6 +101,8 @@
                        status = "disabled";
                        reg = <0x54006900 0x40>;
                        interrupts = <0 35 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_uart1>;
                        clocks = <&uart_clk>;
                        clock-frequency = <36864000>;
                };
@@ -108,6 +112,8 @@
                        status = "disabled";
                        reg = <0x54006a00 0x40>;
                        interrupts = <0 37 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_uart2>;
                        clocks = <&uart_clk>;
                        clock-frequency = <36864000>;
                };
@@ -231,6 +237,8 @@
                        #address-cells = <1>;
                        #size-cells = <0>;
                        interrupts = <0 41 1>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_i2c0>;
                        clocks = <&iobus_clk>;
                        clock-frequency = <100000>;
                };
@@ -304,6 +312,9 @@
                        status = "disabled";
                        reg = <0x5a400000 0x200>;
                        interrupts = <0 78 4>;
+                       pinctrl-names = "default", "1.8v";
+                       pinctrl-0 = <&pinctrl_emmc>;
+                       pinctrl-1 = <&pinctrl_emmc_1v8>;
                        clocks = <&mio 1>;
                        bus-width = <8>;
                        non-removable;
@@ -314,6 +325,9 @@
                        status = "disabled";
                        reg = <0x5a500000 0x200>;
                        interrupts = <0 76 4>;
+                       pinctrl-names = "default", "1.8v";
+                       pinctrl-0 = <&pinctrl_sd>;
+                       pinctrl-1 = <&pinctrl_sd_1v8>;
                        clocks = <&mio 0>;
                        bus-width = <4>;
                };
@@ -323,6 +337,8 @@
                        status = "disabled";
                        reg = <0x5a800100 0x100>;
                        interrupts = <0 80 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb0>;
                        clocks = <&mio 3>, <&mio 6>;
                };
 
@@ -331,6 +347,8 @@
                        status = "disabled";
                        reg = <0x5a810100 0x100>;
                        interrupts = <0 81 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb1>;
                        clocks = <&mio 4>, <&mio 6>;
                };
 
@@ -339,6 +357,8 @@
                        status = "disabled";
                        reg = <0x5a820100 0x100>;
                        interrupts = <0 82 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb2>;
                        clocks = <&mio 5>, <&mio 6>;
                };
 
@@ -347,9 +367,22 @@
                        status = "disabled";
                        reg = <0x5a830100 0x100>;
                        interrupts = <0 83 4>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&pinctrl_usb3>;
                        clocks = <&mio 7>, <&mio 6>;
                };
 
+               soc-glue@5f800000 {
+                       compatible = "simple-mfd", "syscon";
+                       reg = <0x5f800000 0x2000>;
+                       u-boot,dm-pre-reloc;
+
+                       pinctrl: pinctrl {
+                               compatible = "socionext,uniphier-sld3-pinctrl";
+                               u-boot,dm-pre-reloc;
+                       };
+               };
+
                aidet@f1830000 {
                        compatible = "simple-mfd", "syscon";
                        reg = <0xf1830000 0x200>;
@@ -370,3 +403,5 @@
                };
        };
 };
+
+/include/ "uniphier-pinctrl.dtsi"
-- 
1.9.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to