Like a sd card. I have emmc to sd adapter, so dd if=u-boot-sunxi-with-spl.bin of=/dev/sdb bs=1024 seek=8
and then just solder emmc to my board. 2 окт. 2016 г. 23:08 пользователь "Jagan Teki" <jagannadh.t...@gmail.com> написал: On Sun, Oct 2, 2016 at 7:13 PM, Alexandr Bochkarev <aneox.in...@gmail.com> wrote: > Already tried. The same output: > > mmc_load_image_raw_sector: mmc block read error > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### Need few more info, how exactly you wrote SPL on emmc, could you provide that. -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
