If the write transaction size(write_bytes) is not a multiple of word
length, then issue word length writes till the we reach the dangling
bytes. On the final write, issue byte by byte write to complete the
transaction. This marginally improves write throughput when performing
random sized writes to the flash.
Signed-off-by: Vignesh R <vigne...@ti.com>
---
Tested on K2G GP EVM.
drivers/spi/cadence_qspi_apb.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/cadence_qspi_apb.c b/drivers/spi/cadence_qspi_apb.c
index e285d3c1e761..4b891f227243 100644
--- a/drivers/spi/cadence_qspi_apb.c
+++ b/drivers/spi/cadence_qspi_apb.c
@@ -752,10 +752,16 @@ int cadence_qspi_apb_indirect_write_execute(struct
cadence_spi_platdata *plat,
while (remaining > 0) {
write_bytes = remaining > page_size ? page_size : remaining;
/* Handle non-4-byte aligned access to avoid data abort. */
- if (((uintptr_t)txbuf % 4) || (write_bytes % 4))
+ if ((uintptr_t)txbuf % 4) {
writesb(plat->ahbbase, txbuf, write_bytes);
- else
+ } else {
writesl(plat->ahbbase, txbuf, write_bytes >> 2);
+ if (write_bytes % 4) {
+ writesb(plat->ahbbase,
+ txbuf + rounddown(write_bytes, 4),
+ write_bytes % 4);
+ }
+ }
ret = wait_for_bit("QSPI", plat->regbase + CQSPI_REG_SDRAMLEVEL,
CQSPI_REG_SDRAMLEVEL_WR_MASK <<
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
