On 10/17/2016 01:18 PM, Brüns, Stefan wrote:
On Montag, 17. Oktober 2016 12:11:26 CEST Stephen Warren wrote:
On 10/16/2016 12:17 PM, Stefan Brüns wrote:
If the parameter set is empty, the pytest setup fails:
---
call: <CallInfo when='setup' exception: got empty parameter set
['env__dfu_config'], function test_dfu at [...]test_dfu.py:107>
---
This aborts pytest_runtest_makereport and later leads to an exception
during the report generation, as the call to log.start_section(...)
is never executed:
---
Exception: Block nesting mismatch:
"test_dfu[env__usb_dev_port0-env__dfu_config0]" ""
---
How do you trigger this? I believe my test setup has many cases where
the test you added would trigger, but without the issues you mention,
but I'm not 100% sure since I don't know for sure what is causing this
issue.
Which pytest version do you have? I appear to have 2.5.1 (on Ubuntu Trusty)
1. You need "dfu_configs" to be empty
2. Maybe its pytest version dependent, IIRC I have 3.0.2
The first error above can be seen when running pytest with "--debug", it is
written to IIRC pytestdebug.log
Looks like this is a bug in pytest 3, and has been fixed upstream:
https://github.com/pytest-dev/pytest/issues/1849
Pytest 3.0 does not accept empty list in fixture
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
