Hi Stefano, On Wed, Oct 19, 2016 at 4:53 PM, Jagan Teki <[email protected]> wrote: > From: Jagan Teki <[email protected]> > > This series convert fec_mxc to DM and tested both dm and > non-dm code and it is on top of [1] with u-boot-imx/master > branch. > > Changes for v7: > - Remove fec_set_dev_name in dm probe > > Changes for v6: > - Add Acked-by tags in commit message > > Changes for v5: > - Add stub fec calls to minimize the #ifdef's > - Use same func names on eth_ops > - Remove reset_gpio in fec_mxc.h > - Add new patches, for cleanup driver > > Changes for v4: > - rebase to u-boot-imx/master > > Changes for v3: > - Add ARM: dts: imx6qdl-icore: Add FEC support > - icorem6: Use CONFIG_DM_ETH support > > Changes for v2: > - Add TODO for implementing the enet reset code > > [1] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support > > Jagan Teki (5): > net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr > net: fec_mxc: Convert into driver model > net: fec_mxc: Driver cleanups > ARM: dts: imx6qdl-icore: Add FEC support > icorem6: Use CONFIG_DM_ETH support > > arch/arm/cpu/armv7/mx6/Kconfig | 1 + > arch/arm/dts/imx6qdl-icore.dtsi | 24 ++ > board/engicam/icorem6/icorem6.c | 71 ----- > configs/imx6qdl_icore_mmc_defconfig | 1 - > configs/imx6qdl_icore_nand_defconfig | 1 - > drivers/net/fec_mxc.c | 516 > +++++++++++++++++++++++------------ > drivers/net/fec_mxc.h | 31 +-- > 7 files changed, 378 insertions(+), 267 deletions(-)
Please apply this series along with [1] [1] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
