Hi Stefano, On Thu, Oct 20, 2016 at 11:29 AM, Jagan Teki <[email protected]> wrote: > Hi Stefano, > > On Wed, Oct 19, 2016 at 4:53 PM, Jagan Teki <[email protected]> wrote: >> From: Jagan Teki <[email protected]> >> >> This series convert fec_mxc to DM and tested both dm and >> non-dm code and it is on top of [1] with u-boot-imx/master >> branch. >> >> Changes for v7: >> - Remove fec_set_dev_name in dm probe >> >> Changes for v6: >> - Add Acked-by tags in commit message >> >> Changes for v5: >> - Add stub fec calls to minimize the #ifdef's >> - Use same func names on eth_ops >> - Remove reset_gpio in fec_mxc.h >> - Add new patches, for cleanup driver >> >> Changes for v4: >> - rebase to u-boot-imx/master >> >> Changes for v3: >> - Add ARM: dts: imx6qdl-icore: Add FEC support >> - icorem6: Use CONFIG_DM_ETH support >> >> Changes for v2: >> - Add TODO for implementing the enet reset code >> >> [1] [PATCH v7 00/21] imx6: Add Engicam i.CoreM6 QDL support >> >> Jagan Teki (5): >> net: fec_mxc: Remove unneeded eth_device arg from fec_get_hwaddr >> net: fec_mxc: Convert into driver model >> net: fec_mxc: Driver cleanups >> ARM: dts: imx6qdl-icore: Add FEC support >> icorem6: Use CONFIG_DM_ETH support >> >> arch/arm/cpu/armv7/mx6/Kconfig | 1 + >> arch/arm/dts/imx6qdl-icore.dtsi | 24 ++ >> board/engicam/icorem6/icorem6.c | 71 ----- >> configs/imx6qdl_icore_mmc_defconfig | 1 - >> configs/imx6qdl_icore_nand_defconfig | 1 - >> drivers/net/fec_mxc.c | 516 >> +++++++++++++++++++++++------------ >> drivers/net/fec_mxc.h | 31 +-- >> 7 files changed, 378 insertions(+), 267 deletions(-) > > Please apply this series along with [1]
Can you please apply. thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
