On Tue, Dec 20, 2016 at 2:41 PM, Robert Moskowitz <[email protected]> wrote: > Dear listers, > > It has been over a year since I have built a new system and tried to set up > to boot from sata. > > What I did in the past was to use a small mSD card with only the uboot bin > and no partitions. > > All my partitions for either Fedrora25 or Centos7 are on the sata. I should > boot up, the system sees no partitions on the mSD, it scans for other > devices, finds the sata and proceeds from there. > > Something must have changed in the past year. Or else my notes on what to > do are incomplete. > > Can you help? Here is a capture of a boot attempt with F25 on the sata: > > > U-Boot SPL 2016.09.01 (Oct 19 2016 - 13:46:44) > DRAM: 1024 MiB > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from MMC1 > > > U-Boot 2016.09.01 (Oct 19 2016 - 13:46:44 +0000) Allwinner Technology > > CPU: Allwinner A20 (SUN7I) > Model: Cubietech Cubieboard2 > I2C: ready > DRAM: 1 GiB > MMC: SUNXI SD/MMC: 0 > In: serial > Out: serial > Err: serial > SCSI: Target spinup took 0 ms. > AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode > flags: ncq stag pm led clo only pmp pio slum part ccc apst > Net: eth0: ethernet@01c50000 > Hit any key to stop autoboot: 0 > ** Invalid partition 1 ** > ** Invalid partition 1 ** > ** Invalid partition 1 ** > =>
try latest master and also please give some more command log, sata part or similar thanks! -- Jagan Teki Free Software Engineer | www.openedev.com U-Boot, Linux | Upstream Maintainer Hyderabad, India. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
