On 12/20/2016 09:14 AM, Jagan Teki wrote:
On Tue, Dec 20, 2016 at 2:41 PM, Robert Moskowitz <[email protected]> wrote:
Dear listers,
It has been over a year since I have built a new system and tried to set up
to boot from sata.
What I did in the past was to use a small mSD card with only the uboot bin
and no partitions.
All my partitions for either Fedrora25 or Centos7 are on the sata. I should
boot up, the system sees no partitions on the mSD, it scans for other
devices, finds the sata and proceeds from there.
Something must have changed in the past year. Or else my notes on what to
do are incomplete.
Can you help? Here is a capture of a boot attempt with F25 on the sata:
U-Boot SPL 2016.09.01 (Oct 19 2016 - 13:46:44)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC1
U-Boot 2016.09.01 (Oct 19 2016 - 13:46:44 +0000) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Model: Cubietech Cubieboard2
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
In: serial
Out: serial
Err: serial
SCSI: Target spinup took 0 ms.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: eth0: ethernet@01c50000
Hit any key to stop autoboot: 0
** Invalid partition 1 **
** Invalid partition 1 **
** Invalid partition 1 **
=>
try latest master and also please give some more command log, sata
part or similar
I can not build a uboot; I have to take what is available. Where can I
get a newer Cubieboard2 uboot?
And that is the sum total output appearing on the console. If there is
more to tease out somehow, please tell me.
thank you
_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot
