Hi, 

On 01/05/2017 04:52 AM, york sun wrote:
> On 12/06/2016 08:08 PM, Yangbo Lu wrote:
>> There would be compiling error as below when enable driver model for esdhc.
>> undefined reference to `dm_gpio_get_value'
>> undefined reference to `gpio_request_by_name_nodev'
>> This patch is to make GPIO support optional with CONFIG_DM_GPIO. Because
>> all boards of QorIQ platform don't need it and they just check register for
>> CD/WP status, only some boards of i.MX platform require this.
>>
>> Signed-off-by: Yangbo Lu <[email protected]>
>> ---
>>  drivers/mmc/fsl_esdhc.c | 10 ++++++++--
>>  1 file changed, 8 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
>> index 9796d39..da3a151 100644
>> --- a/drivers/mmc/fsl_esdhc.c
>> +++ b/drivers/mmc/fsl_esdhc.c
>> @@ -104,8 +104,10 @@ struct fsl_esdhc_priv {
>>      struct udevice *dev;
>>      int non_removable;
>>      int wp_enable;
>> +#ifdef CONFIG_DM_GPIO
>>      struct gpio_desc cd_gpio;
>>      struct gpio_desc wp_gpio;
>> +#endif
>>  };
>>
>>  /* Return the XFERTYP flags for a given command and data packet */
>> @@ -687,10 +689,11 @@ static int esdhc_getcd(struct mmc *mmc)
>>  #ifdef CONFIG_DM_MMC
>>      if (priv->non_removable)
>>              return 1;
>> -
>> +#ifdef CONFIG_DM_GPIO
>>      if (dm_gpio_is_valid(&priv->cd_gpio))
>>              return dm_gpio_get_value(&priv->cd_gpio);
>>  #endif
>> +#endif
>>
>>      while (!(esdhc_read32(&regs->prsstat) & PRSSTAT_CINS) && --timeout)
>>              udelay(1000);
>> @@ -967,17 +970,20 @@ static int fsl_esdhc_probe(struct udevice *dev)
>>              priv->non_removable = 1;
>>       } else {
>>              priv->non_removable = 0;
>> +#ifdef CONFIG_DM_GPIO
>>              gpio_request_by_name_nodev(fdt, node, "cd-gpios", 0,
>>                                         &priv->cd_gpio, GPIOD_IS_IN);
>> +#endif
>>      }
>>
>>      priv->wp_enable = 1;
>>
>> +#ifdef CONFIG_DM_GPIO
>>      ret = gpio_request_by_name_nodev(fdt, node, "wp-gpios", 0,
>>                                       &priv->wp_gpio, GPIOD_IS_IN);
>>      if (ret)
>>              priv->wp_enable = 0;
>> -
>> +#endif
>>      /*
>>       * TODO:
>>       * Because lack of clk driver, if SDHC clk is not enabled,
>>
> 
> Jaehoon,
> 
> This set looks OK to me. Please review and comment. I can merge it with 
> your ack.

Sorry for late. I missed this patch. It looks good to me.

Acked-by: Jaehoon Chung <[email protected]>

Best Regards,
Jaehoon Chung

> 
> Yangbo,
> 
> For MMC or SD patches, please CC Jaehoon.
> 
> York
> 
> 
> 

_______________________________________________
U-Boot mailing list
[email protected]
http://lists.denx.de/mailman/listinfo/u-boot

Reply via email to