Nick Thompson wrote: > Add initial support for DA8xx SoC's and the spectrum digital DA830 EVM board. > > DA8xx is similar to DaVinci devices, but has a differing memory map and > updated peripherals. It is intended that DaVinci drivers will be modified in > some way to support these differences. > > A side effect of this is that there are some legacy code constructs in this > patch set that are required to utilise the DaVinci drivers as they stand now. > For example there are some volatiles and memory pointer types defined that are > no longer considered acceptable. > > The new code in this patch set doesn't use these constructs and the remaining > artifacts can be removed when the DaVinci drivers stop using them. > > --- > Changes from previous patch set: > > Removed Ethernet support (will add after davinci_emac has been patched) > Moved board support to DaVinci directory for easier driver integration. > Patch set run through checkpatch. (remaining WARNINGS should be justifiable) > Removed unused code. > Addressed comments on v1 Patch set. >
I ran this patchset against u-boot-ti/master. Please check on this error. dv_board.c:41:32: error: asm/arch/emac_defs.h: No such file or directory make[1]: *** No rule to make target `/work/test/u-boot/t-da8xx/DATE/build/board/davinci/da830evm/.depend', needed by `/work/test/u-boot/t-da8xx/2009_10_24_14_39/build/board/davinci/da830evm/libda830evm.a'. Stop. make: *** [/work/test/u-boot/t-da8xx/DATE/build/board/davinci/da830evm/libda830evm.a] Error 2 Tom > Nick. > _______________________________________________ > U-Boot mailing list > [email protected] > http://lists.denx.de/mailman/listinfo/u-boot _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
