> -----Original Message-----
> From: Diana Madalina Craciun
> Sent: Friday, March 10, 2017 8:54 PM
> To: Bharat Bhushan <[email protected]>; york sun
> <[email protected]>; [email protected]
> Cc: Z.Q. Hou <[email protected]>
> Subject: Re: [U-Boot] [PATCH] pcie-layerscape: Fixup iommu-map property
> of pci node
> 
> On 2/24/2017 10:04 AM, Bharat Bhushan wrote:
> > This patch fixup iommu-map property on pci node to have a valid
> > mapping of requester-id to stream-id.
> > The requester-id to stream-id mapping is based on PCI-LUT table
> > initialization.
> >
> > Signed-off-by: Bharat Bhushan <[email protected]>
> > ---
> >  drivers/pci/pcie_layerscape_fixup.c | 53
> > +++++++++++++++++++++++++++++++++++++
> >  1 file changed, 53 insertions(+)
> >
> > diff --git a/drivers/pci/pcie_layerscape_fixup.c
> > b/drivers/pci/pcie_layerscape_fixup.c
> > index 8f8f6b6..301afee 100644
> > --- a/drivers/pci/pcie_layerscape_fixup.c
> > +++ b/drivers/pci/pcie_layerscape_fixup.c
> > @@ -103,6 +103,56 @@ static void fdt_pcie_set_msi_map_entry(void
> *blob, struct ls_pcie *pcie,
> >     fdt_appendprop_u32(blob, nodeoffset, "msi-map", 1);  }
> >
> > +/*
> > + * An iommu-map is a property to be added to the pci controller
> > + * node.  It is a table, where each entry consists of 4 fields
> > + * e.g.:
> > + *
> > + *      iommu-map = <[devid] [phandle-to-iommu-ctrl] [stream-id] [count]
> > + *                 [devid] [phandle-to-iommu-ctrl] [stream-id] [count]>;
> > + */
> > +static void fdt_pcie_set_iommu_map_entry(void *blob, struct ls_pcie
> *pcie,
> > +                                  u32 devid, u32 streamid)
> > +{
> > +   u32 *prop;
> > +   u32 iommu_map[4];
> > +   int nodeoffset;
> > +   int lenp;
> > +
> > +   /* find pci controller node */
> > +   nodeoffset = fdt_node_offset_by_compat_reg(blob, "fsl,ls-pcie",
> > +                                              pcie->dbi_res.start);
> > +   if (nodeoffset < 0) {
> > +#ifdef CONFIG_FSL_PCIE_COMPAT /* Compatible with older version of
> dts node */
> > +           nodeoffset = fdt_node_offset_by_compat_reg(blob,
> > +                           CONFIG_FSL_PCIE_COMPAT, pcie-
> >dbi_res.start);
> > +           if (nodeoffset < 0)
> > +                   return;
> > +#else
> > +           return;
> > +#endif
> > +   }
> > +
> > +   /* get phandle to MSI controller */
> 
> I guess that the phandle is to the iommu node, not to the MSI controller.

Yes, Thanks I will correct this in next version.

Thanks
-Bharat
> 
> > +   prop = fdt_getprop_w(blob, nodeoffset, "iommu-map", &lenp);
> > +   if (prop == NULL) {
> > +           debug("\n%s: ERROR: missing iommu-map: PCIe%d\n",
> > +                 __func__, pcie->idx);
> > +           return;
> > +   }
> > +
> > +   /* set iommu-map row */
> > +   iommu_map[0] = cpu_to_fdt32(devid);
> > +   iommu_map[1] = *++prop;
> > +   iommu_map[2] = cpu_to_fdt32(streamid);
> > +   iommu_map[3] = cpu_to_fdt32(1);
> > +
> > +   if (devid == 0)
> > +           fdt_setprop_inplace(blob, nodeoffset, "iommu-map",
> iommu_map, 16);
> > +   else
> > +           fdt_appendprop(blob, nodeoffset, "iommu-map",
> iommu_map, 16); }
> > +
> >  static void fdt_fixup_pcie(void *blob)  {
> >     struct udevice *dev, *bus;
> > @@ -139,6 +189,9 @@ static void fdt_fixup_pcie(void *blob)
> >             /* update msi-map in device tree */
> >             fdt_pcie_set_msi_map_entry(blob, pcie, bdf >> 8,
> >                                        streamid);
> > +           /* update iommu-map in device tree */
> > +           fdt_pcie_set_iommu_map_entry(blob, pcie, bdf >> 8,
> > +                                      streamid);
> >     }
> >  }
> >  #endif
> 
> Diana

_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot

Reply via email to