Hi Alvaro,
On 15 April 2017 at 16:03, Álvaro Fernández Rojas <nolt...@gmail.com> wrote:
> Add a new sysreset driver based on linux/drivers/power/reset/syscon-reboot.c,
> which provides a generic driver for platforms that only require writing a mask
> to a regmap offset.
>
> Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com>
> ---
> v2: no changes
>
> drivers/sysreset/Kconfig | 8 +++++
> drivers/sysreset/Makefile | 1 +
> drivers/sysreset/sysreset_syscon.c | 60
> ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 69 insertions(+)
> create mode 100644 drivers/sysreset/sysreset_syscon.c
>
> diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
> index 05a37b9..0946c9d 100644
> --- a/drivers/sysreset/Kconfig
> +++ b/drivers/sysreset/Kconfig
> @@ -13,4 +13,12 @@ config SYSRESET
> to effect a reset. The uclass will try all available drivers when
> reset_walk() is called.
>
> +config SYSRESET_SYSCON
> + bool "Enable support for mfd syscon reboot driver"
> + depends on SYSRESET
> + select REGMAP
> + select SYSCON
> + help
> + Description here.
Yes please!
> +
> endmenu
> diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
> index 49b8bb6..1205f47 100644
> --- a/drivers/sysreset/Makefile
> +++ b/drivers/sysreset/Makefile
> @@ -18,3 +18,4 @@ obj-$(CONFIG_ARCH_SNAPDRAGON) += sysreset_snapdragon.o
> obj-$(CONFIG_ARCH_STI) += sysreset_sti.o
> obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o
> obj-$(CONFIG_ARCH_ASPEED) += sysreset_ast.o
> +obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o
> diff --git a/drivers/sysreset/sysreset_syscon.c
> b/drivers/sysreset/sysreset_syscon.c
> new file mode 100644
> index 0000000..61aeb1d
> --- /dev/null
> +++ b/drivers/sysreset/sysreset_syscon.c
> @@ -0,0 +1,60 @@
> +/*
> + * Copyright (C) 2017 Álvaro Fernández Rojas <nolt...@gmail.com>
> + *
> + * Derived from linux/drivers/power/reset/syscon-reboot.c:
> + * Copyright (C) 2013, Applied Micro Circuits Corporation
> + * Author: Feng Kan <f...@apm.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <errno.h>
> +#include <sysreset.h>
this should go at the end
> +#include <regmap.h>
> +#include <syscon.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +static int syscon_reboot_request(struct udevice *dev, enum sysreset_t type)
> +{
> + struct udevice *syscon;
> + struct regmap *regmap;
> + unsigned int offset, mask;
> + int err;
> +
> + err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
> + "regmap", &syscon);
> + if (err) {
> + error("unable to find syscon device\n");
> + return err;
> + }
> +
> + regmap = syscon_get_regmap(syscon);
> + if (!regmap) {
> + error("unable to find regmap\n");
> + return -ENODEV;
> + }
> +
> + offset = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "offset",
> 0);
> + mask = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "mask", 0);
You should do this in ofdata_to_platdata() or probe() and store it in
a local struct
> +
> + return regmap_write(regmap, offset, mask);
Check error here, and either return -EINPROGRESS or some other error
> +}
> +
> +static struct sysreset_ops syscon_reboot_ops = {
> + .request = syscon_reboot_request,
> +};
> +
> +static const struct udevice_id syscon_reboot_ids[] = {
> + { .compatible = "syscon-reboot" },
> + { /* sentinel */ }
> +};
> +
> +U_BOOT_DRIVER(syscon_reboot) = {
> + .name = "syscon_reboot",
> + .id = UCLASS_SYSRESET,
> + .of_match = syscon_reboot_ids,
> + .ops = &syscon_reboot_ops,
> +};
> --
> 2.1.4
>
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
