Hi Simon,
El 16/04/2017 a las 21:34, Simon Glass escribió:
> Hi Alvaro,
>
> On 15 April 2017 at 16:03, Álvaro Fernández Rojas <nolt...@gmail.com> wrote:
>> Add a new sysreset driver based on linux/drivers/power/reset/syscon-reboot.c,
>> which provides a generic driver for platforms that only require writing a
>> mask
>> to a regmap offset.
>>
>> Signed-off-by: Álvaro Fernández Rojas <nolt...@gmail.com>
>> ---
>> v2: no changes
>>
>> drivers/sysreset/Kconfig | 8 +++++
>> drivers/sysreset/Makefile | 1 +
>> drivers/sysreset/sysreset_syscon.c | 60
>> ++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 69 insertions(+)
>> create mode 100644 drivers/sysreset/sysreset_syscon.c
>>
>> diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
>> index 05a37b9..0946c9d 100644
>> --- a/drivers/sysreset/Kconfig
>> +++ b/drivers/sysreset/Kconfig
>> @@ -13,4 +13,12 @@ config SYSRESET
>> to effect a reset. The uclass will try all available drivers when
>> reset_walk() is called.
>>
>> +config SYSRESET_SYSCON
>> + bool "Enable support for mfd syscon reboot driver"
>> + depends on SYSRESET
>> + select REGMAP
>> + select SYSCON
>> + help
>> + Description here.
>
> Yes please!
Sure, my fault :P
>
>> +
>> endmenu
>> diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
>> index 49b8bb6..1205f47 100644
>> --- a/drivers/sysreset/Makefile
>> +++ b/drivers/sysreset/Makefile
>> @@ -18,3 +18,4 @@ obj-$(CONFIG_ARCH_SNAPDRAGON) += sysreset_snapdragon.o
>> obj-$(CONFIG_ARCH_STI) += sysreset_sti.o
>> obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o
>> obj-$(CONFIG_ARCH_ASPEED) += sysreset_ast.o
>> +obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o
>> diff --git a/drivers/sysreset/sysreset_syscon.c
>> b/drivers/sysreset/sysreset_syscon.c
>> new file mode 100644
>> index 0000000..61aeb1d
>> --- /dev/null
>> +++ b/drivers/sysreset/sysreset_syscon.c
>> @@ -0,0 +1,60 @@
>> +/*
>> + * Copyright (C) 2017 Álvaro Fernández Rojas <nolt...@gmail.com>
>> + *
>> + * Derived from linux/drivers/power/reset/syscon-reboot.c:
>> + * Copyright (C) 2013, Applied Micro Circuits Corporation
>> + * Author: Feng Kan <f...@apm.com>
>> + *
>> + * SPDX-License-Identifier: GPL-2.0+
>> + */
>> +
>> +#include <common.h>
>> +#include <dm.h>
>> +#include <errno.h>
>> +#include <sysreset.h>
>
> this should go at the end
I will fix it.
>
>> +#include <regmap.h>
>> +#include <syscon.h>
>> +
>> +DECLARE_GLOBAL_DATA_PTR;
>> +
>> +static int syscon_reboot_request(struct udevice *dev, enum sysreset_t type)
>> +{
>> + struct udevice *syscon;
>> + struct regmap *regmap;
>> + unsigned int offset, mask;
>> + int err;
>> +
>> + err = uclass_get_device_by_phandle(UCLASS_SYSCON, dev,
>> + "regmap", &syscon);
>> + if (err) {
>> + error("unable to find syscon device\n");
>> + return err;
>> + }
>> +
>> + regmap = syscon_get_regmap(syscon);
>> + if (!regmap) {
>> + error("unable to find regmap\n");
>> + return -ENODEV;
>> + }
>> +
>> + offset = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "offset",
>> 0);
>> + mask = fdtdec_get_uint(gd->fdt_blob, dev_of_offset(dev), "mask", 0);
>
> You should do this in ofdata_to_platdata() or probe() and store it in
> a local struct
I tried doing it in probe:
https://github.com/Noltari/u-boot/commit/37f45960f240c3e57fa70afe69d9b5782c9e6f9f
However it looks like probe is never called with my current U_BOOT_DRIVER
settings...
Then I tried doing it in bind instead of probe and it looks like the syscon
device isn't ready when syscon-reboot is binded...
Any ideas? :$
>
>
>> +
>> + return regmap_write(regmap, offset, mask);
>
> Check error here, and either return -EINPROGRESS or some other error
I will, but regmap_write returns always 0, so there's no error at all to
check...
>
>> +}
>> +
>> +static struct sysreset_ops syscon_reboot_ops = {
>> + .request = syscon_reboot_request,
>> +};
>> +
>> +static const struct udevice_id syscon_reboot_ids[] = {
>> + { .compatible = "syscon-reboot" },
>> + { /* sentinel */ }
>> +};
>> +
>> +U_BOOT_DRIVER(syscon_reboot) = {
>> + .name = "syscon_reboot",
>> + .id = UCLASS_SYSRESET,
>> + .of_match = syscon_reboot_ids,
>> + .ops = &syscon_reboot_ops,
>> +};
>> --
>> 2.1.4
>>
>
> Regards,
> Simon
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
