Fix macro error of dwc2 driver, add macro definition to config force mode and HNP/SRP capability. Add gpio config to control vbus in host mode.
Signed-off-by: Meng Dongyang <[email protected]> --- board/rockchip/evb_rk3328/evb-rk3328.c | 42 +++++++++++++++++++++++++++++++--- drivers/usb/host/dwc2.c | 24 ++++++++++++++++++- drivers/usb/host/dwc2.h | 10 ++++---- 3 files changed, 68 insertions(+), 8 deletions(-) diff --git a/board/rockchip/evb_rk3328/evb-rk3328.c b/board/rockchip/evb_rk3328/evb-rk3328.c index a7895cb..e8e793c 100644 --- a/board/rockchip/evb_rk3328/evb-rk3328.c +++ b/board/rockchip/evb_rk3328/evb-rk3328.c @@ -31,12 +31,48 @@ int dram_init_banksize(void) return 0; } -int usb_gadget_handle_interrupts(void) +#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG) +#include <usb.h> +#include <usb/dwc2_udc.h> + +static struct dwc2_plat_otg_data rk3328_otg_data = { + .rx_fifo_sz = 512, + .np_tx_fifo_sz = 16, + .tx_fifo_sz = 128, +}; + +int board_usb_init(int index, enum usb_init_type init) { - return 0; + int node; + const char *mode; + bool matched = false; + const void *blob = gd->fdt_blob; + + /* find the usb_otg node */ + node = fdt_node_offset_by_compatible(blob, -1, + "rockchip,rk3328-usb"); + + while (node > 0) { + mode = fdt_getprop(blob, node, "dr_mode", NULL); + if (mode && strcmp(mode, "otg") == 0) { + matched = true; + break; + } + + node = fdt_node_offset_by_compatible(blob, node, + "rockchip,rk3328-usb"); + } + if (!matched) { + debug("Not found usb_otg device\n"); + return -ENODEV; + } + rk3328_otg_data.regs_otg = fdtdec_get_addr(blob, node, "reg"); + + return dwc2_udc_probe(&rk3328_otg_data); } -int board_usb_init(int index, enum usb_init_type init) +int board_usb_cleanup(int index, enum usb_init_type init) { return 0; } +#endif diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c index 0e5df15..ca6d950 100644 --- a/drivers/usb/host/dwc2.c +++ b/drivers/usb/host/dwc2.c @@ -16,6 +16,7 @@ #include <wait_bit.h> #include <asm/io.h> #include <power/regulator.h> +#include <asm/gpio.h> #include "dwc2.h" @@ -41,6 +42,7 @@ struct dwc2_priv { u8 in_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT]; struct dwc2_core_regs *regs; + struct gpio_desc vbus_gpio; int root_hub_devnum; bool ext_vbus; bool oc_disable; @@ -370,7 +372,7 @@ static void dwc_otg_core_init(struct dwc2_priv *priv) usbcfg &= ~DWC2_GUSBCFG_DDRSEL; #endif } else { /* UTMI+ interface */ -#if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16) +#if (CONFIG_DWC2_UTMI_WIDTH == 16) usbcfg |= DWC2_GUSBCFG_PHYIF; #endif } @@ -394,6 +396,11 @@ static void dwc_otg_core_init(struct dwc2_priv *priv) usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M; } #endif + +#ifdef CONFIG_DWC2_FORCE_HOST_MODE + usbcfg |= DWC2_GUSBCFG_FORCEHOSTMODE; +#endif + writel(usbcfg, ®s->gusbcfg); /* Program the GAHBCFG Register. */ @@ -422,8 +429,10 @@ static void dwc_otg_core_init(struct dwc2_priv *priv) writel(ahbcfg, ®s->gahbcfg); +#ifdef CONFIG_DWC2_HNP_SRP_CAP /* Program the GUSBCFG register for HNP/SRP. */ setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP); +#endif #ifdef CONFIG_DWC2_IC_USB_CAP setbits_le32(®s->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP); @@ -1251,6 +1260,16 @@ static int dwc2_usb_probe(struct udevice *dev) { struct dwc2_priv *priv = dev_get_priv(dev); struct usb_bus_priv *bus_priv = dev_get_uclass_priv(dev); + int ret; + + /* Vbus gpio */ + ret = gpio_request_by_name(dev, "vbus-gpio", 0, + &priv->vbus_gpio, GPIOD_IS_OUT); + if (ret) + debug("vbus-gpio node is not exist!"); + + if (dm_gpio_is_valid(&priv->vbus_gpio)) + dm_gpio_set_value(&priv->vbus_gpio, 1); bus_priv->desc_before_addr = true; @@ -1263,6 +1282,9 @@ static int dwc2_usb_remove(struct udevice *dev) dwc2_uninit_common(priv->regs); + if (dm_gpio_is_valid(&priv->vbus_gpio)) + dm_gpio_set_value(&priv->vbus_gpio, 0); + return 0; } diff --git a/drivers/usb/host/dwc2.h b/drivers/usb/host/dwc2.h index 4482dc6..3c62e9b 100644 --- a/drivers/usb/host/dwc2.h +++ b/drivers/usb/host/dwc2.h @@ -771,11 +771,11 @@ struct dwc2_core_regs { #define CONFIG_DWC2_MAX_TRANSFER_SIZE 65535 #define CONFIG_DWC2_MAX_PACKET_COUNT 511 -#define DWC2_PHY_TYPE_FS 0 -#define DWC2_PHY_TYPE_UTMI 1 -#define DWC2_PHY_TYPE_ULPI 2 +#define DWC2_PHY_TYPE_UTMI 0 +#define DWC2_PHY_TYPE_ULPI 1 +#define DWC2_PHY_TYPE_FS 2 #define CONFIG_DWC2_PHY_TYPE DWC2_PHY_TYPE_UTMI /* PHY type */ -#define CONFIG_DWC2_UTMI_WIDTH 8 /* UTMI bus width (8/16) */ +#define CONFIG_DWC2_UTMI_WIDTH 16 /* UTMI bus width (8/16) */ #undef CONFIG_DWC2_PHY_ULPI_DDR /* ULPI PHY uses DDR mode */ #define CONFIG_DWC2_PHY_ULPI_EXT_VBUS /* ULPI PHY controls VBUS */ @@ -785,5 +785,7 @@ struct dwc2_core_regs { #undef CONFIG_DWC2_THR_CTL /* Threshold control */ #define CONFIG_DWC2_TX_THR_LENGTH 64 #undef CONFIG_DWC2_IC_USB_CAP /* IC Cap */ +#define CONFIG_DWC2_FORCE_HOST_MODE /* Force host mode */ +#undef CONFIG_DWC2_HNP_SRP_CAP /* HNP/SRP Cap */ #endif /* __DWC2_H__ */ -- 1.9.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
