From: Fabio Estevam <[email protected]> Currently the following build error is seen when a board using MMC SPL is built and the MXS nand driver is also selected:
arch/arm/cpu/armv7/built-in.o: In function `arch_cpu_init': arch/arm/cpu/armv7/mx6/soc.c:432: undefined reference to 'mxs_dma_init' On mx6 the only user of mxs_dma_init() is the mxs nand driver, so move it there. Signed-off-by: Fabio Estevam <[email protected]> --- arch/arm/cpu/armv7/mx6/soc.c | 5 ----- drivers/mtd/nand/mxs_nand.c | 1 + 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 2bedbdb..ecbc3b2 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -427,11 +427,6 @@ int arch_cpu_init(void) imx_set_wdog_powerdown(false); /* Disable PDE bit of WMCR register */ -#ifdef CONFIG_APBH_DMA - /* Start APBH DMA */ - mxs_dma_init(); -#endif - init_src(); return 0; diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 9200544..5aa3608 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -1114,6 +1114,7 @@ int mxs_nand_init(struct mxs_nand_info *info) } /* Init the DMA controller. */ + mxs_dma_init(); for (j = MXS_DMA_CHANNEL_AHB_APBH_GPMI0; j <= MXS_DMA_CHANNEL_AHB_APBH_GPMI7; j++) { ret = mxs_dma_init_channel(j); -- 2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
