On 29/06/2017 14:33, Vanessa Maegima wrote: > As mx6sabreauto supports SPL now, all variants can boot using the same > defconfig. > > This patch: > - Removes non-SPL targets. > - Renames target to mx6sabreauto_defconfig. > - Renames folder and board files to mx6sabreauto. > - Updates MAINTAINERS, Makefile and Kconfig accordingly. > - Removes .cfg files. > - Adds a README with instructions to build and flash SPL and u-boot.img. > > Signed-off-by: Vanessa Maegima <[email protected]> > --- > arch/arm/cpu/armv7/mx6/Kconfig | 6 +- > board/freescale/mx6qsabreauto/MAINTAINERS | 9 -- > board/freescale/mx6qsabreauto/imximage.cfg | 129 ------------------ > board/freescale/mx6qsabreauto/mx6dl.cfg | 130 ------------------ > board/freescale/mx6qsabreauto/mx6qp.cfg | 145 > --------------------- > .../{mx6qsabreauto => mx6sabreauto}/Kconfig | 6 +- > board/freescale/mx6sabreauto/MAINTAINERS | 7 + > .../{mx6qsabreauto => mx6sabreauto}/Makefile | 2 +- > board/freescale/mx6sabreauto/README | 20 +++ > .../mx6sabreauto.c} | 0 > configs/mx6dlsabreauto_defconfig | 44 ------- > configs/mx6qpsabreauto_defconfig | 43 ------ > configs/mx6qsabreauto_defconfig | 44 ------- > ...reauto_spl_defconfig => mx6sabreauto_defconfig} | 2 +- > .../configs/{mx6qsabreauto.h => mx6sabreauto.h} | 6 +- > 15 files changed, 38 insertions(+), 555 deletions(-) > delete mode 100644 board/freescale/mx6qsabreauto/MAINTAINERS > delete mode 100644 board/freescale/mx6qsabreauto/imximage.cfg > delete mode 100644 board/freescale/mx6qsabreauto/mx6dl.cfg > delete mode 100644 board/freescale/mx6qsabreauto/mx6qp.cfg > rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Kconfig (54%) > create mode 100644 board/freescale/mx6sabreauto/MAINTAINERS > rename board/freescale/{mx6qsabreauto => mx6sabreauto}/Makefile (85%) > create mode 100644 board/freescale/mx6sabreauto/README > rename board/freescale/{mx6qsabreauto/mx6qsabreauto.c => > mx6sabreauto/mx6sabreauto.c} (100%) > delete mode 100644 configs/mx6dlsabreauto_defconfig > delete mode 100644 configs/mx6qpsabreauto_defconfig > delete mode 100644 configs/mx6qsabreauto_defconfig > rename configs/{mx6qsabreauto_spl_defconfig => mx6sabreauto_defconfig} (97%) > rename include/configs/{mx6qsabreauto.h => mx6sabreauto.h} (94%) > > diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig > index 0d500aa..4a38dc2 100644 > --- a/arch/arm/cpu/armv7/mx6/Kconfig > +++ b/arch/arm/cpu/armv7/mx6/Kconfig > @@ -202,8 +202,8 @@ config TARGET_MX6Q_ICORE_RQS > select SUPPORT_SPL > select SPL_LOAD_FIT > > -config TARGET_MX6QSABREAUTO > - bool "mx6qsabreauto" > +config TARGET_MX6SABREAUTO > + bool "mx6sabreauto" > select BOARD_LATE_INIT > select SUPPORT_SPL > select DM > @@ -413,7 +413,7 @@ source "board/engicam/icorem6/Kconfig" > source "board/engicam/icorem6_rqs/Kconfig" > source "board/engicam/isiotmx6ul/Kconfig" > source "board/freescale/mx6qarm2/Kconfig" > -source "board/freescale/mx6qsabreauto/Kconfig" > +source "board/freescale/mx6sabreauto/Kconfig" > source "board/freescale/mx6sabresd/Kconfig" > source "board/freescale/mx6slevk/Kconfig" > source "board/freescale/mx6sllevk/Kconfig" > diff --git a/board/freescale/mx6qsabreauto/MAINTAINERS > b/board/freescale/mx6qsabreauto/MAINTAINERS > deleted file mode 100644 > index f148dac..0000000 > --- a/board/freescale/mx6qsabreauto/MAINTAINERS > +++ /dev/null > @@ -1,9 +0,0 @@ > -MX6QSABREAUTO BOARD > -M: Fabio Estevam <[email protected]> > -M: Peng Fan <[email protected]> > -S: Maintained > -F: board/freescale/mx6qsabreauto/ > -F: include/configs/mx6qsabreauto.h > -F: configs/mx6dlsabreauto_defconfig > -F: configs/mx6qsabreauto_defconfig > -F: configs/mx6qpsabreauto_defconfig > diff --git a/board/freescale/mx6qsabreauto/imximage.cfg > b/board/freescale/mx6qsabreauto/imximage.cfg > deleted file mode 100644 > index 16bf473..0000000 > --- a/board/freescale/mx6qsabreauto/imximage.cfg > +++ /dev/null > @@ -1,129 +0,0 @@ > -/* > - * Copyright (C) 2012 Freescale Semiconductor, Inc. > - * > - * SPDX-License-Identifier: GPL-2.0+ > - * > - * Refer doc/README.imximage for more details about how-to configure > - * and create imximage boot image > - * > - * The syntax is taken as close as possible with the kwbimage > - */ > -/* image version */ > - > -IMAGE_VERSION 2 > - > -/* > - * Boot Device : one of > - * spi, sd (the board has no nand neither onenand) > - */ > -BOOT_FROM sd > - > -/* > - * Device Configuration Data (DCD) > - * > - * Each entry must have the format: > - * Addr-type Address Value > - * > - * where: > - * Addr-type register length (1,2 or 4 bytes) > - * Address absolute address of the register > - * value value to be stored in the register > - */ > -DATA 4 0x020e0798 0x000C0000 > -DATA 4 0x020e0758 0x00000000 > -DATA 4 0x020e0588 0x00000030 > -DATA 4 0x020e0594 0x00000030 > -DATA 4 0x020e056c 0x00000030 > -DATA 4 0x020e0578 0x00000030 > -DATA 4 0x020e074c 0x00000030 > -DATA 4 0x020e057c 0x00000030 > -DATA 4 0x020e058c 0x00000000 > -DATA 4 0x020e059c 0x00000030 > -DATA 4 0x020e05a0 0x00000030 > -DATA 4 0x020e078c 0x00000030 > -DATA 4 0x020e0750 0x00020000 > -DATA 4 0x020e05a8 0x00000028 > -DATA 4 0x020e05b0 0x00000028 > -DATA 4 0x020e0524 0x00000028 > -DATA 4 0x020e051c 0x00000028 > -DATA 4 0x020e0518 0x00000028 > -DATA 4 0x020e050c 0x00000028 > -DATA 4 0x020e05b8 0x00000028 > -DATA 4 0x020e05c0 0x00000028 > -DATA 4 0x020e0774 0x00020000 > -DATA 4 0x020e0784 0x00000028 > -DATA 4 0x020e0788 0x00000028 > -DATA 4 0x020e0794 0x00000028 > -DATA 4 0x020e079c 0x00000028 > -DATA 4 0x020e07a0 0x00000028 > -DATA 4 0x020e07a4 0x00000028 > -DATA 4 0x020e07a8 0x00000028 > -DATA 4 0x020e0748 0x00000028 > -DATA 4 0x020e05ac 0x00000028 > -DATA 4 0x020e05b4 0x00000028 > -DATA 4 0x020e0528 0x00000028 > -DATA 4 0x020e0520 0x00000028 > -DATA 4 0x020e0514 0x00000028 > -DATA 4 0x020e0510 0x00000028 > -DATA 4 0x020e05bc 0x00000028 > -DATA 4 0x020e05c4 0x00000028 > -DATA 4 0x021b0800 0xa1390003 > -DATA 4 0x021b080c 0x001F001F > -DATA 4 0x021b0810 0x001F001F > -DATA 4 0x021b480c 0x001F001F > -DATA 4 0x021b4810 0x001F001F > -DATA 4 0x021b083c 0x43260335 > -DATA 4 0x021b0840 0x031A030B > -DATA 4 0x021b483c 0x4323033B > -DATA 4 0x021b4840 0x0323026F > -DATA 4 0x021b0848 0x483D4545 > -DATA 4 0x021b4848 0x44433E48 > -DATA 4 0x021b0850 0x41444840 > -DATA 4 0x021b4850 0x4835483E > -DATA 4 0x021b081c 0x33333333 > -DATA 4 0x021b0820 0x33333333 > -DATA 4 0x021b0824 0x33333333 > -DATA 4 0x021b0828 0x33333333 > -DATA 4 0x021b481c 0x33333333 > -DATA 4 0x021b4820 0x33333333 > -DATA 4 0x021b4824 0x33333333 > -DATA 4 0x021b4828 0x33333333 > -DATA 4 0x021b08b8 0x00000800 > -DATA 4 0x021b48b8 0x00000800 > -DATA 4 0x021b0004 0x00020036 > -DATA 4 0x021b0008 0x09444040 > -DATA 4 0x021b000c 0x8A8F7955 > -DATA 4 0x021b0010 0xFF328F64 > -DATA 4 0x021b0014 0x01FF00DB > -DATA 4 0x021b0018 0x00001740 > -DATA 4 0x021b001c 0x00008000 > -DATA 4 0x021b002c 0x000026d2 > -DATA 4 0x021b0030 0x008F1023 > -DATA 4 0x021b0040 0x00000047 > -DATA 4 0x021b0000 0x841A0000 > -DATA 4 0x021b001c 0x04088032 > -DATA 4 0x021b001c 0x00008033 > -DATA 4 0x021b001c 0x00048031 > -DATA 4 0x021b001c 0x09408030 > -DATA 4 0x021b001c 0x04008040 > -DATA 4 0x021b0020 0x00005800 > -DATA 4 0x021b0818 0x00011117 > -DATA 4 0x021b4818 0x00011117 > -DATA 4 0x021b0004 0x00025576 > -DATA 4 0x021b0404 0x00011006 > -DATA 4 0x021b001c 0x00000000 > - > -/* set the default clock gate to save power */ > -DATA 4 0x020c4068 0x00C03F3F > -DATA 4 0x020c406c 0x0030FC03 > -DATA 4 0x020c4070 0x0FFFC000 > -DATA 4 0x020c4074 0x3FF00000 > -DATA 4 0x020c4078 0xFFFFF300 > -DATA 4 0x020c407c 0x0F0000F3 > -DATA 4 0x020c4080 0x00000FFF > - > -/* enable AXI cache for VDOA/VPU/IPU */ > -DATA 4 0x020e0010 0xF00000CF > -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ > -DATA 4 0x020e0018 0x007F007F > -DATA 4 0x020e001c 0x007F007F > diff --git a/board/freescale/mx6qsabreauto/mx6dl.cfg > b/board/freescale/mx6qsabreauto/mx6dl.cfg > deleted file mode 100644 > index 89078e5..0000000 > --- a/board/freescale/mx6qsabreauto/mx6dl.cfg > +++ /dev/null > @@ -1,130 +0,0 @@ > -/* > - * Copyright (C) 2013 Freescale Semiconductor, Inc. > - * Jason Liu <[email protected]> > - * > - * SPDX-License-Identifier: GPL-2.0+ > - * > - * Refer doc/README.imximage for more details about how-to configure > - * and create imximage boot image > - * > - * The syntax is taken as close as possible with the kwbimage > - */ > -/* image version */ > - > -IMAGE_VERSION 2 > - > -/* > - * Boot Device : one of > - * spi, sd (the board has no nand neither onenand) > - */ > -BOOT_FROM sd > - > -/* > - * Device Configuration Data (DCD) > - * > - * Each entry must have the format: > - * Addr-type Address Value > - * > - * where: > - * Addr-type register length (1,2 or 4 bytes) > - * Address absolute address of the register > - * value value to be stored in the register > - */ > -DATA 4 0x020e0774 0x000C0000 > -DATA 4 0x020e0754 0x00000000 > -DATA 4 0x020e04ac 0x00000030 > -DATA 4 0x020e04b0 0x00000030 > -DATA 4 0x020e0464 0x00000030 > -DATA 4 0x020e0490 0x00000030 > -DATA 4 0x020e074c 0x00000030 > -DATA 4 0x020e0494 0x00000030 > -DATA 4 0x020e04a0 0x00000000 > -DATA 4 0x020e04b4 0x00000030 > -DATA 4 0x020e04b8 0x00000030 > -DATA 4 0x020e076c 0x00000030 > -DATA 4 0x020e0750 0x00020000 > -DATA 4 0x020e04bc 0x00000028 > -DATA 4 0x020e04c0 0x00000028 > -DATA 4 0x020e04c4 0x00000028 > -DATA 4 0x020e04c8 0x00000028 > -DATA 4 0x020e04cc 0x00000028 > -DATA 4 0x020e04d0 0x00000028 > -DATA 4 0x020e04d4 0x00000028 > -DATA 4 0x020e04d8 0x00000028 > -DATA 4 0x020e0760 0x00020000 > -DATA 4 0x020e0764 0x00000028 > -DATA 4 0x020e0770 0x00000028 > -DATA 4 0x020e0778 0x00000028 > -DATA 4 0x020e077c 0x00000028 > -DATA 4 0x020e0780 0x00000028 > -DATA 4 0x020e0784 0x00000028 > -DATA 4 0x020e078c 0x00000028 > -DATA 4 0x020e0748 0x00000028 > -DATA 4 0x020e0470 0x00000028 > -DATA 4 0x020e0474 0x00000028 > -DATA 4 0x020e0478 0x00000028 > -DATA 4 0x020e047c 0x00000028 > -DATA 4 0x020e0480 0x00000028 > -DATA 4 0x020e0484 0x00000028 > -DATA 4 0x020e0488 0x00000028 > -DATA 4 0x020e048c 0x00000028 > -DATA 4 0x021b0800 0xa1390003 > -DATA 4 0x021b080c 0x001F001F > -DATA 4 0x021b0810 0x001F001F > -DATA 4 0x021b480c 0x001F001F > -DATA 4 0x021b4810 0x001F001F > -DATA 4 0x021b083c 0x42190217 > -DATA 4 0x021b0840 0x017B017B > -DATA 4 0x021b483c 0x4176017B > -DATA 4 0x021b4840 0x015F016C > -DATA 4 0x021b0848 0x4C4C4D4C > -DATA 4 0x021b4848 0x4A4D4C48 > -DATA 4 0x021b0850 0x3F3F3F40 > -DATA 4 0x021b4850 0x3538382E > -DATA 4 0x021b081c 0x33333333 > -DATA 4 0x021b0820 0x33333333 > -DATA 4 0x021b0824 0x33333333 > -DATA 4 0x021b0828 0x33333333 > -DATA 4 0x021b481c 0x33333333 > -DATA 4 0x021b4820 0x33333333 > -DATA 4 0x021b4824 0x33333333 > -DATA 4 0x021b4828 0x33333333 > -DATA 4 0x021b08b8 0x00000800 > -DATA 4 0x021b48b8 0x00000800 > -DATA 4 0x021b0004 0x00020025 > -DATA 4 0x021b0008 0x00333030 > -DATA 4 0x021b000c 0x676B5313 > -DATA 4 0x021b0010 0xB66E8B63 > -DATA 4 0x021b0014 0x01FF00DB > -DATA 4 0x021b0018 0x00001740 > -DATA 4 0x021b001c 0x00008000 > -DATA 4 0x021b002c 0x000026d2 > -DATA 4 0x021b0030 0x006B1023 > -DATA 4 0x021b0040 0x00000047 > -DATA 4 0x021b0000 0x841A0000 > -DATA 4 0x021b001c 0x04008032 > -DATA 4 0x021b001c 0x00008033 > -DATA 4 0x021b001c 0x00048031 > -DATA 4 0x021b001c 0x05208030 > -DATA 4 0x021b001c 0x04008040 > -DATA 4 0x021b0020 0x00005800 > -DATA 4 0x021b0818 0x00011117 > -DATA 4 0x021b4818 0x00011117 > -DATA 4 0x021b0004 0x00025565 > -DATA 4 0x021b0404 0x00011006 > -DATA 4 0x021b001c 0x00000000 > - > -/* set the default clock gate to save power */ > -DATA 4 0x020c4068 0x00C03F3F > -DATA 4 0x020c406c 0x0030FC03 > -DATA 4 0x020c4070 0x0FFFC000 > -DATA 4 0x020c4074 0x3FF00000 > -DATA 4 0x020c4078 0xFFFFF300 > -DATA 4 0x020c407c 0x0F0000C3 > -DATA 4 0x020c4080 0x00000FFF > - > -/* enable AXI cache for VDOA/VPU/IPU */ > -DATA 4 0x020e0010 0xF00000CF > -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ > -DATA 4 0x020e0018 0x007F007F > -DATA 4 0x020e001c 0x007F007F > diff --git a/board/freescale/mx6qsabreauto/mx6qp.cfg > b/board/freescale/mx6qsabreauto/mx6qp.cfg > deleted file mode 100644 > index 2298c77..0000000 > --- a/board/freescale/mx6qsabreauto/mx6qp.cfg > +++ /dev/null > @@ -1,145 +0,0 @@ > -/* > - * Copyright (C) 2015 Freescale Semiconductor, Inc. > - * > - * SPDX-License-Identifier: GPL-2.0+ > - * > - * Refer doc/README.imximage for more details about how-to configure > - * and create imximage boot image > - * > - * The syntax is taken as close as possible with the kwbimage > - */ > -/* image version */ > - > -#define __ASSEMBLY__ > -#include <config.h> > - > -IMAGE_VERSION 2 > - > -/* > - * Boot Device : one of spi, sd, eimnor, nand, sata: > - * spinor: flash_offset: 0x0400 > - * nand: flash_offset: 0x0400 > - * sata: flash_offset: 0x0400 > - * sd/mmc: flash_offset: 0x0400 > - * eimnor: flash_offset: 0x1000 > - */ > -BOOT_FROM sd > - > -/* > - * Device Configuration Data (DCD) > - * > - * Each entry must have the format: > - * Addr-type Address Value > - * > - * where: > - * Addr-type register length (1,2 or 4 bytes) > - * Address absolute address of the register > - * value value to be stored in the register > - */ > -DATA 4 0x020e0798 0x000C0000 > -DATA 4 0x020e0758 0x00000000 > -DATA 4 0x020e0588 0x00000030 > -DATA 4 0x020e0594 0x00000030 > -DATA 4 0x020e056c 0x00000030 > -DATA 4 0x020e0578 0x00000030 > -DATA 4 0x020e074c 0x00000030 > -DATA 4 0x020e057c 0x00000030 > -DATA 4 0x020e058c 0x00000000 > -DATA 4 0x020e059c 0x00000030 > -DATA 4 0x020e05a0 0x00000030 > -DATA 4 0x020e078c 0x00000030 > -DATA 4 0x020e0750 0x00020000 > -DATA 4 0x020e05a8 0x00000030 > -DATA 4 0x020e05b0 0x00000030 > -DATA 4 0x020e0524 0x00000030 > -DATA 4 0x020e051c 0x00000030 > -DATA 4 0x020e0518 0x00000030 > -DATA 4 0x020e050c 0x00000030 > -DATA 4 0x020e05b8 0x00000030 > -DATA 4 0x020e05c0 0x00000030 > -DATA 4 0x020e0774 0x00020000 > -DATA 4 0x020e0784 0x00000030 > -DATA 4 0x020e0788 0x00000030 > -DATA 4 0x020e0794 0x00000030 > -DATA 4 0x020e079c 0x00000030 > -DATA 4 0x020e07a0 0x00000030 > -DATA 4 0x020e07a4 0x00000030 > -DATA 4 0x020e07a8 0x00000030 > -DATA 4 0x020e0748 0x00000030 > -DATA 4 0x020e05ac 0x00000030 > -DATA 4 0x020e05b4 0x00000030 > -DATA 4 0x020e0528 0x00000030 > -DATA 4 0x020e0520 0x00000030 > -DATA 4 0x020e0514 0x00000030 > -DATA 4 0x020e0510 0x00000030 > -DATA 4 0x020e05bc 0x00000030 > -DATA 4 0x020e05c4 0x00000030 > -DATA 4 0x021b0800 0xa1390003 > -DATA 4 0x021b080c 0x001b001e > -DATA 4 0x021b0810 0x002e0029 > -DATA 4 0x021b480c 0x001b002a > -DATA 4 0x021b4810 0x0019002c > -DATA 4 0x021b083c 0x43240334 > -DATA 4 0x021b0840 0x0324031a > -DATA 4 0x021b483c 0x43340344 > -DATA 4 0x021b4840 0x03280276 > -DATA 4 0x021b0848 0x44383A3E > -DATA 4 0x021b4848 0x3C3C3846 > -DATA 4 0x021b0850 0x2e303230 > -DATA 4 0x021b4850 0x38283E34 > -DATA 4 0x021b081c 0x33333333 > -DATA 4 0x021b0820 0x33333333 > -DATA 4 0x021b0824 0x33333333 > -DATA 4 0x021b0828 0x33333333 > -DATA 4 0x021b481c 0x33333333 > -DATA 4 0x021b4820 0x33333333 > -DATA 4 0x021b4824 0x33333333 > -DATA 4 0x021b4828 0x33333333 > -DATA 4 0x021b08c0 0x24912492 > -DATA 4 0x021b48c0 0x24912492 > -DATA 4 0x021b08b8 0x00000800 > -DATA 4 0x021b48b8 0x00000800 > -DATA 4 0x021b0004 0x00020036 > -DATA 4 0x021b0008 0x09444040 > -DATA 4 0x021b000c 0x898E7955 > -DATA 4 0x021b0010 0xFF328F64 > -DATA 4 0x021b0014 0x01FF00DB > -DATA 4 0x021b0018 0x00001740 > -DATA 4 0x021b001c 0x00008000 > - > -DATA 4 0x021b002c 0x000026d2 > -DATA 4 0x021b0030 0x008E1023 > -DATA 4 0x021b0040 0x00000047 > -DATA 4 0x021b0400 0x14420000 > -DATA 4 0x021b0000 0x841A0000 > -DATA 4 0x00bb0008 0x00000004 > -DATA 4 0x00bb000c 0x2891E41A > -DATA 4 0x00bb0038 0x00000564 > -DATA 4 0x00bb0014 0x00000040 > -DATA 4 0x00bb0028 0x00000020 > -DATA 4 0x00bb002c 0x00000020 > -DATA 4 0x021b001c 0x04088032 > -DATA 4 0x021b001c 0x00008033 > -DATA 4 0x021b001c 0x00048031 > -DATA 4 0x021b001c 0x09408030 > -DATA 4 0x021b001c 0x04008040 > -DATA 4 0x021b0020 0x00005800 > -DATA 4 0x021b0818 0x00011117 > -DATA 4 0x021b4818 0x00011117 > -DATA 4 0x021b0004 0x00025576 > -DATA 4 0x021b0404 0x00011006 > -DATA 4 0x021b001c 0x00000000 > -/* set the default clock gate to save power */ > -DATA 4, 0x020c4068, 0x00C03F3F > -DATA 4, 0x020c406c, 0x0030FC03 > -DATA 4, 0x020c4070, 0x0FFFC000 > -DATA 4, 0x020c4074, 0x3FF00000 > -DATA 4, 0x020c4078, 0xFFFFF300 > -DATA 4, 0x020c407c, 0x0F0000F3 > -DATA 4, 0x020c4080, 0x00000FFF > - > -/* enable AXI cache for VDOA/VPU/IPU */ > -DATA 4, 0x020e0010, 0xF00000CF > -/* set IPU AXI-id1 Qos=0x1 AXI-id0/2/3 Qos=0x7 */ > -DATA 4, 0x020e0018, 0x77177717 > -DATA 4, 0x020e001c, 0x77177717 > diff --git a/board/freescale/mx6qsabreauto/Kconfig > b/board/freescale/mx6sabreauto/Kconfig > similarity index 54% > rename from board/freescale/mx6qsabreauto/Kconfig > rename to board/freescale/mx6sabreauto/Kconfig > index e579c0f..5b4faf6 100644 > --- a/board/freescale/mx6qsabreauto/Kconfig > +++ b/board/freescale/mx6sabreauto/Kconfig > @@ -1,12 +1,12 @@ > -if TARGET_MX6QSABREAUTO > +if TARGET_MX6SABREAUTO > > config SYS_BOARD > - default "mx6qsabreauto" > + default "mx6sabreauto" > > config SYS_VENDOR > default "freescale" > > config SYS_CONFIG_NAME > - default "mx6qsabreauto" > + default "mx6sabreauto" > > endif > diff --git a/board/freescale/mx6sabreauto/MAINTAINERS > b/board/freescale/mx6sabreauto/MAINTAINERS > new file mode 100644 > index 0000000..a89f05a > --- /dev/null > +++ b/board/freescale/mx6sabreauto/MAINTAINERS > @@ -0,0 +1,7 @@ > +MX6SABREAUTO BOARD > +M: Fabio Estevam <[email protected]> > +M: Peng Fan <[email protected]> > +S: Maintained > +F: board/freescale/mx6sabreauto/ > +F: include/configs/mx6sabreauto.h > +F: configs/mx6sabreauto_defconfig > diff --git a/board/freescale/mx6qsabreauto/Makefile > b/board/freescale/mx6sabreauto/Makefile > similarity index 85% > rename from board/freescale/mx6qsabreauto/Makefile > rename to board/freescale/mx6sabreauto/Makefile > index ac5bc81..87f4ec0 100644 > --- a/board/freescale/mx6qsabreauto/Makefile > +++ b/board/freescale/mx6sabreauto/Makefile > @@ -6,4 +6,4 @@ > # SPDX-License-Identifier: GPL-2.0+ > # > > -obj-y := mx6qsabreauto.o > +obj-y := mx6sabreauto.o > diff --git a/board/freescale/mx6sabreauto/README > b/board/freescale/mx6sabreauto/README > new file mode 100644 > index 0000000..7e4596a > --- /dev/null > +++ b/board/freescale/mx6sabreauto/README > @@ -0,0 +1,20 @@ > +How to use and build U-Boot on mx6sabreauto > +------------------------------------------- > + > +mx6sabreauto_defconfig target supports mx6q/mx6dl/mx6qp sabreauto variants. > + > +In order to build it: > + > +$ make mx6sabreauto_defconfig > + > +$ make > + > +This will generate the SPL and u-boot.img binaries. > + > +- Flash the SPL binary into the SD card: > + > +$ sudo dd if=SPL of=/dev/sdX bs=1K seek=1 && sync > + > +- Flash the u-boot.img binary into the SD card: > + > +$ sudo dd if=u-boot.img of=/dev/sdX bs=1K seek=69 && sync > diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c > b/board/freescale/mx6sabreauto/mx6sabreauto.c > similarity index 100% > rename from board/freescale/mx6qsabreauto/mx6qsabreauto.c > rename to board/freescale/mx6sabreauto/mx6sabreauto.c > diff --git a/configs/mx6dlsabreauto_defconfig > b/configs/mx6dlsabreauto_defconfig > deleted file mode 100644 > index ba5ab8a..0000000 > --- a/configs/mx6dlsabreauto_defconfig > +++ /dev/null > @@ -1,44 +0,0 @@ > -CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > -CONFIG_TARGET_MX6QSABREAUTO=y > -CONFIG_VIDEO=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL" > -CONFIG_BOOTDELAY=3 > -# CONFIG_CONSOLE_MUX is not set > -CONFIG_SYS_CONSOLE_IS_IN_ENV=y > -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > -CONFIG_HUSH_PARSER=y > -CONFIG_CMD_BOOTZ=y > -# CONFIG_CMD_IMLS is not set > -# CONFIG_CMD_FLASH is not set > -CONFIG_CMD_MMC=y > -CONFIG_CMD_SF=y > -CONFIG_CMD_I2C=y > -CONFIG_CMD_USB=y > -CONFIG_CMD_DFU=y > -CONFIG_CMD_USB_MASS_STORAGE=y > -CONFIG_CMD_GPIO=y > -CONFIG_CMD_DHCP=y > -CONFIG_CMD_MII=y > -CONFIG_CMD_PING=y > -CONFIG_CMD_CACHE=y > -CONFIG_CMD_EXT2=y > -CONFIG_CMD_EXT4=y > -CONFIG_CMD_EXT4_WRITE=y > -CONFIG_CMD_FAT=y > -CONFIG_CMD_FS_GENERIC=y > -CONFIG_DFU_MMC=y > -CONFIG_DFU_SF=y > -CONFIG_MTD_NOR_FLASH=y > -CONFIG_SPI_FLASH=y > -CONFIG_SPI_FLASH_STMICRO=y > -CONFIG_USB=y > -CONFIG_USB_STORAGE=y > -CONFIG_USB_GADGET=y > -CONFIG_CI_UDC=y > -CONFIG_USB_GADGET_DOWNLOAD=y > -CONFIG_G_DNL_MANUFACTURER="FSL" > -CONFIG_G_DNL_VENDOR_NUM=0x0525 > -CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 > -# CONFIG_VIDEO_SW_CURSOR is not set > -CONFIG_OF_LIBFDT=y > diff --git a/configs/mx6qpsabreauto_defconfig > b/configs/mx6qpsabreauto_defconfig > deleted file mode 100644 > index 96a248e..0000000 > --- a/configs/mx6qpsabreauto_defconfig > +++ /dev/null > @@ -1,43 +0,0 @@ > -CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > -CONFIG_TARGET_MX6QSABREAUTO=y > -CONFIG_VIDEO=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6qp.cfg,MX6Q" > -CONFIG_BOOTDELAY=3 > -# CONFIG_CONSOLE_MUX is not set > -CONFIG_SYS_CONSOLE_IS_IN_ENV=y > -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > -CONFIG_HUSH_PARSER=y > -CONFIG_CMD_BOOTZ=y > -# CONFIG_CMD_IMLS is not set > -CONFIG_CMD_MMC=y > -CONFIG_CMD_SF=y > -CONFIG_CMD_I2C=y > -CONFIG_CMD_USB=y > -CONFIG_CMD_DFU=y > -CONFIG_CMD_USB_MASS_STORAGE=y > -CONFIG_CMD_GPIO=y > -CONFIG_CMD_DHCP=y > -CONFIG_CMD_MII=y > -CONFIG_CMD_PING=y > -CONFIG_CMD_CACHE=y > -CONFIG_CMD_EXT2=y > -CONFIG_CMD_EXT4=y > -CONFIG_CMD_EXT4_WRITE=y > -CONFIG_CMD_FAT=y > -CONFIG_CMD_FS_GENERIC=y > -CONFIG_DFU_MMC=y > -CONFIG_DFU_SF=y > -CONFIG_MTD_NOR_FLASH=y > -CONFIG_SPI_FLASH=y > -CONFIG_SPI_FLASH_STMICRO=y > -CONFIG_USB=y > -CONFIG_USB_STORAGE=y > -CONFIG_USB_GADGET=y > -CONFIG_CI_UDC=y > -CONFIG_USB_GADGET_DOWNLOAD=y > -CONFIG_G_DNL_MANUFACTURER="FSL" > -CONFIG_G_DNL_VENDOR_NUM=0x0525 > -CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 > -# CONFIG_VIDEO_SW_CURSOR is not set > -CONFIG_OF_LIBFDT=y > diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig > deleted file mode 100644 > index 015207d..0000000 > --- a/configs/mx6qsabreauto_defconfig > +++ /dev/null > @@ -1,44 +0,0 @@ > -CONFIG_ARM=y > -CONFIG_ARCH_MX6=y > -CONFIG_TARGET_MX6QSABREAUTO=y > -CONFIG_VIDEO=y > -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q" > -CONFIG_BOOTDELAY=3 > -# CONFIG_CONSOLE_MUX is not set > -CONFIG_SYS_CONSOLE_IS_IN_ENV=y > -CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y > -CONFIG_HUSH_PARSER=y > -CONFIG_CMD_BOOTZ=y > -# CONFIG_CMD_IMLS is not set > -# CONFIG_CMD_FLASH is not set > -CONFIG_CMD_MMC=y > -CONFIG_CMD_SF=y > -CONFIG_CMD_I2C=y > -CONFIG_CMD_USB=y > -CONFIG_CMD_DFU=y > -CONFIG_CMD_USB_MASS_STORAGE=y > -CONFIG_CMD_GPIO=y > -CONFIG_CMD_DHCP=y > -CONFIG_CMD_MII=y > -CONFIG_CMD_PING=y > -CONFIG_CMD_CACHE=y > -CONFIG_CMD_EXT2=y > -CONFIG_CMD_EXT4=y > -CONFIG_CMD_EXT4_WRITE=y > -CONFIG_CMD_FAT=y > -CONFIG_CMD_FS_GENERIC=y > -CONFIG_DFU_MMC=y > -CONFIG_DFU_SF=y > -CONFIG_MTD_NOR_FLASH=y > -CONFIG_SPI_FLASH=y > -CONFIG_SPI_FLASH_STMICRO=y > -CONFIG_USB=y > -CONFIG_USB_STORAGE=y > -CONFIG_USB_GADGET=y > -CONFIG_CI_UDC=y > -CONFIG_USB_GADGET_DOWNLOAD=y > -CONFIG_G_DNL_MANUFACTURER="FSL" > -CONFIG_G_DNL_VENDOR_NUM=0x0525 > -CONFIG_G_DNL_PRODUCT_NUM=0xa4a5 > -# CONFIG_VIDEO_SW_CURSOR is not set > -CONFIG_OF_LIBFDT=y > diff --git a/configs/mx6qsabreauto_spl_defconfig > b/configs/mx6sabreauto_defconfig > similarity index 97% > rename from configs/mx6qsabreauto_spl_defconfig > rename to configs/mx6sabreauto_defconfig > index ce2d1d2..c1b3bbf 100644 > --- a/configs/mx6qsabreauto_spl_defconfig > +++ b/configs/mx6sabreauto_defconfig > @@ -3,7 +3,7 @@ CONFIG_ARCH_MX6=y > CONFIG_SPL_GPIO_SUPPORT=y > CONFIG_SPL_LIBCOMMON_SUPPORT=y > CONFIG_SPL_LIBGENERIC_SUPPORT=y > -CONFIG_TARGET_MX6QSABREAUTO=y > +CONFIG_TARGET_MX6SABREAUTO=y > CONFIG_SPL_MMC_SUPPORT=y > CONFIG_SPL_SERIAL_SUPPORT=y > CONFIG_SPL_LIBDISK_SUPPORT=y > diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6sabreauto.h > similarity index 94% > rename from include/configs/mx6qsabreauto.h > rename to include/configs/mx6sabreauto.h > index 99b48ca..fd0d5ce 100644 > --- a/include/configs/mx6qsabreauto.h > +++ b/include/configs/mx6sabreauto.h > @@ -6,8 +6,8 @@ > * SPDX-License-Identifier: GPL-2.0+ > */ > > -#ifndef __MX6QSABREAUTO_CONFIG_H > -#define __MX6QSABREAUTO_CONFIG_H > +#ifndef __MX6SABREAUTO_CONFIG_H > +#define __MX6SABREAUTO_CONFIG_H > > #ifdef CONFIG_SPL > #include "imx6_spl.h" > @@ -76,4 +76,4 @@ > #define CONFIG_POWER_PFUZE100 > #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 > > -#endif /* __MX6QSABREAUTO_CONFIG_H */ > +#endif /* __MX6SABREAUTO_CONFIG_H */ >
Nice cleanup, thanks ! Reviewed-by: Stefano Babic <[email protected]> Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] ===================================================================== _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
