Hi Mario, On 14 July 2017 at 05:54, Mario Six <[email protected]> wrote: > From: Dirk Eibach <[email protected]> > > Implement support for the Marvell Alaska X 88X2242P Integrated Dual-port > and Quad-port Multi-speed Ethernet Transceivers. > > Signed-off-by: Dirk Eibach <[email protected]> > Signed-off-by: Mario Six <[email protected]> > --- > > drivers/net/phy/Kconfig | 67 ++++ > drivers/net/phy/Makefile | 1 + > drivers/net/phy/marvell.c | 1 - > drivers/net/phy/mv88x2.c | 846 > ++++++++++++++++++++++++++++++++++++++++++++++ > drivers/net/phy/mv88x2.h | 12 + > drivers/net/phy/phy.c | 3 + > include/phy.h | 1 + > 7 files changed, 930 insertions(+), 1 deletion(-) > create mode 100644 drivers/net/phy/mv88x2.c > create mode 100644 drivers/net/phy/mv88x2.h >
We should really be using driver model here. Is the generic phy uclass good enough (generic-phy.h), or do we need a new uclass for Ethernet PHY? Regards, Simon _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
